Secondhand Turmed 26x23cm/21x24cm Tromel

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 16.07.2025

Stainless Steel Sterilization Container Analysis Report

Overview and Product Description

The images show 2 units of stainless steel sterilization containers (drums), which are understood to be used for the sterilization of medical instruments in autoclave devices, and 2 units of lids for these containers. The products are essential equipment used in hygiene and sterilization processes in medical environments. The containers have perforated structures on their lower parts and lids, which allow for steam penetration during the sterilization process.

The total number of parts in the images is as follows:

• 2 units of Stainless Steel Container Bodies
• 2 units of Stainless Steel Lids

Physical State and Condition

The overall condition of the products is assessed as used but in good condition. The metal surfaces retain their shine, which suggests that the products have either been lightly used or regularly maintained. No signs of dirt or rust were found. No significant deformation is observed on the surfaces, apart from minor and superficial scratches or fingerprints that may result from use. There are no serious defects such as dents, cracks, or discoloration.

Mechanical Parts Inspection

No issues were found during the visual inspection of the containers’ mechanical parts. No condition that could negatively affect the functionality of the parts has been identified.

• Lids and Handles: The lids of both containers and the handles on them appear to be intact.
• Locking Mechanisms: The latch-type locking mechanisms on the sides, which secure the lids to the body, are all in place and in working order.
• Ventilation Holes: There are no blockages or deformations in the holes on the bottom, which are critical for sterilization.

Label and Technical Information

Upon detailed inspection of the images, no label or engraving containing technical information such as brand, model, serial number, REF code, or year of manufacture could be identified on the products. Therefore, no comments can be made about the brand and origin of the products.

Potential Risk Assessment

Based on the visual inspection, it can be said that the overall condition of the products is good. Their stainless steel structures appear solid, and no cracks or significant wear have been observed on the lid locking mechanisms. Therefore, they are not considered to pose a significant potential risk of failure in their current state. It should be noted that this assessment is a projection based solely on visual evidence and that the functionality of the products has not been fully tested.