Secondhand Zeiss OPMI MDO XY S5 Eye Surgical Microscope

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 19.10.2025

Zeiss Surgical Microscope Analysis Report

General Assessment and Device Identification

Upon examination, it has been determined that the provided images belong to two Carl Zeiss brand surgical microscopes. The first of these devices is an OPMI MDO model positioned on a wheeled and mobile floor stand (S5). The second device is an OPMI MD model mounted on a different stand. It is observed that both devices have been used, but they maintain their physical integrity. The fact that the first device, in particular, is covered with protective nylon suggests that it is stored or awaiting use.

Brand and Model Information

Brand and model information of the devices has been definitively confirmed by examining the labels and logos in the images. Both devices are original products manufactured by Carl Zeiss, a reputable manufacturer.

• 1. Device (with Floor Stand)
  • Brand: Carl Zeiss
  • Microscope Model: OPMI MDO XY
  • Stand Model: S5
• 2. Device (Mounted on Other Unit)
  • Brand: Carl Zeiss
  • Microscope Model: OPMI MD

Physical Condition and Deformation

The general condition of the devices is good, despite being used. No serious physical damage that could affect functionality has been observed.

1. Device (OPMI MDO): The body of this microscope is protected by a transparent nylon cover. There are some minor scratches and scuff marks on the base and body of the wheeled S5 stand due to usage. However, no significant cracks, breaks, or discoloration are visible on the microscope arms, optical head, or casing.

2. Device (OPMI MD): This device, depicted in a single image, appears to be clean and well-maintained in its visible parts. No deformation has been detected on its optical parts or body.

Mechanical and Control Components

The mechanical components and control mechanisms of both microscopes are visually in good condition.

• 1. Device (OPMI MDO): The articulated arms and connection points, which enable the device’s mobility, appear robust. Although there are slight abrasions on the Zoom, Focus, Up, and Down labels on the foot or hand-operated control panel, the texts indicating their functions are legible. The control buttons are intact.
• 2. Device (OPMI MD): The manual focus and adjustment knobs located on the microscope head are in place, and no damage is visible.

Label Information and Technical Details

Technical information legible from the labels on the devices is summarized below.

• 1. Device (OPMI MDO):
  • Brand: Carl Zeiss
  • Model Code: OPMI MDO XY
  • Objective Information: f 170
  • Number on Label: 302466
• 2. Device (OPMI MD):
  • Brand: Carl Zeiss
  • Model Code: OPMI MD

Potential Fault Risk

According to the examination of the images, there are no obvious risk factors (broken cable, dent, rust, liquid contact marks) that would impede the operation of the devices or cause a malfunction in the near future. The fact that the first device is covered may indicate that it has not been actively used for some time; therefore, it would be beneficial to perform maintenance and calibration checks before putting it into operation. Considering their current physical condition, both microscopes are in good condition.