Secondhand JYM JZB-1800C Syringe Pump

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 01.10.2025

Erenler Medikal ZJ-1800C Syringe Pump Analysis Report

Overview and Product Identification

The product shown in the visuals is a syringe pump that enables controlled and precise amounts of fluid (medication, nutrients, etc.) to be administered to patients in medical settings over a specific time interval. The device’s front face features the Erenler Medikal logo, while its rear label contains the information Model: ZJ-1800C. The product consists of a single main unit, and no external accessories have been identified in the visuals.

Condition Assessment

The device is generally in used condition. Its white plastic casing shows yellowing in places, and noticeable dirt and dust accumulation are present, especially in the recessed areas at the back. This indicates that the device has been in use for some time and requires a detailed cleaning. Since no non-original parts or workmanship were observed, the device is considered original. The expiration date of the calibration label being 2020 suggests that the device has not undergone maintenance or inspection for a long time.

Physical Deformation and Damage Detection

There are no major breaks or cracks that would disrupt the overall structure of the device. However, upon close inspection, a thin scratch or crack is visible on the dark plastic surface protecting the screen on the front panel. Aside from this, minor signs of use are present on the casing.

Technical Information and Label Analysis

The metal label on the back of the device contains important technical information and codes. This information is listed below:

• Device Type: Syringe Pump
• Model: ZJ-1800C
• Serial Number (SN): 130507512
• Power Requirement: 100-240V ~50/60Hz 25VA
• Safety Class: I
• IP Protection Class: IPX4
• Manufacturing Date: 2013-5-7

Additionally, there is another green label on the device’s front panel. This label includes a company logo, the serial number SN: 19-06-0766, and an expiration date in the format SK:2020. This is likely a calibration or maintenance label, and it has expired.

Mechanical and Electronic Components

The device’s metal clamp mechanism and tightening screw, which secure it to a pole or bedside, appear robust. There are no visible breaks or missing parts in the blue and white plastic sections where the syringe is placed and the pusher mechanism is located. The rear face of the device features an on/off switch and a power input socket. Since the screen is off, no comment can be made regarding the functionality of the electronic components.

Accessories and Battery

No accessories (power cable, user manual, box, etc.) other than the device itself are visible in the visuals. It is not possible to determine from the visuals whether the device has an internal battery or, if so, its condition.

Potential Malfunction Risk Assessment

The overall condition of the device suggests prolonged use and storage. The expiration of the calibration label in 2020 is a significant deficiency for a medical device and indicates that it must be checked and calibrated by a professional technical service before use. Although the scratch on the screen protector is superficial damage, the general wear and tear of the device should be considered. However, no immediate malfunction risks such as severe impact, dents on the casing, or damage to cables have been observed.