Secondhand Medway WZ-50C6 Syringe Pump

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 18.12.2025

Lion WZ-50C6 Microinfusion Pump Analysis Report

Device Identification

The device shown in the image is a medical device referred to in medical literature as an “Injector Pump”, “Perfusor”, or, as labeled on the device itself in English, a “Microinfusion Pump”. The device is a single-channel pump unit designed to administer a specified dosage of medication or fluid to a patient intravenously in a precise and controlled manner.

Brand and Model

Upon examining the texts and logo located in the upper right corner of the device’s front panel, the product’s brand and model information are clearly visible:

• Brand: According to the logo inside the circle and the text written below it, located on the lower right part of the device, the brand has been identified as LION.
• Model: The model label in the upper right corner of the device clearly reads “MICROINFUSION PUMP WZ-50C6“. Therefore, the model is WZ-50C6.

Areas of Use

This device is critical equipment used in intensive care units, anesthesia, neonatal services, and emergency departments. Its primary function is to enable the infusion of medications to patients with millimeter precision (ml/hour) using standard syringes (such as 20ml, 30ml, 50ml). The purchaser can use this device in clinical settings requiring medical fluid transfer or in veterinary clinics.

General Condition and Cosmetic Examination

The device’s general appearance indicates that it has been subjected to long-term use and storage. The cosmetic condition of the product can be described as “worn” and “requiring maintenance”. There is a yellowing (turning cream-colored) of the plastic casing over time; this suggests the device is old or has been exposed to daylight.

Physical Deformations and Cleanliness

The most noticeable aspect of the device is its lack of cleanliness:

• There is significant dirt and staining on the blue/turquoise mechanical clamping arm and sliding mechanism where the syringe is placed.
• Dirt accumulation from use is visible on the front surface of the casing and around the buttons.
• The edges of the label located on the upper left side of the casing are peeling and deformed.
• No major cracks or breaks have been detected on the outer casing in the image, but superficial scratches are highly probable.

Mechanical and Electronic Components

The technical analysis based on the image is as follows:

• Keypad: The control buttons on the device’s front panel (Power, Stop, Start, Select, etc.) are physically in place. The text and symbols on the buttons are legible, with no signs of fading.
• Screen: The digital display panel (LED screen window) appears intact; however, since the device is off, it is not possible to comment on the screen’s functionality, pixel loss, or brightness based on the image.
• Clamping Mechanism: The syringe holder arm (clamp) and the piston pushing mechanism are physically intact, but the dirt on them may affect their mobility.

Label Information and Manufacturing Year Analysis

There are labels on the device that provide important data regarding its history:

• Calibration Label: A green biomedical label is located on the upper left corner of the device. The inscription “Calibration Date: 09.11.2009” is legible on the label. This information proves that the device has been in use since at least 2009 and has not undergone a new calibration or maintenance procedure for a very long time. This situation indicates that the device’s compliance with current standards must be tested.
• Operating Instructions: On the right side, under the heading “Notice for operation”, there are English warnings regarding the device’s use (e.g., use of 20ml, 30ml, 50ml syringes, setting flow rate, etc.).

Accessories and Connections

No power cable or external accessories belonging to the device are visible in the image. The device is shown as a single unit. The rear panel or side connection points are not visible from this angle.

Quantity Information

Only 1 unit of the Lion WZ-50C6 injector pump is visible in the image.

Potential Risk of Malfunction

The extensive dirt on the device’s exterior and the old calibration label from 2009 indicate that the device may have been dormant for a long time. In such cases, it is highly probable that the internal battery has reached the end of its life. Furthermore, mechanical jams may occur if the mechanical syringe pushing system is not cleaned. It is recommended that the buyer subject the device to detailed technical maintenance and sterilization, as well as testing of electronic sensor sensitivities, before use.

Originality Status

The device, with its logos, label placement, and panel arrangement, has an original product structure consistent with Lion brand’s standard production (OEM) WZ-50C6 model.