Secondhand Medison Sonoace X8 Ultrasound Machine

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 29.01.2026

MEDISON SONOACE X8 Medical Ultrasonography Device Analysis Report

Device Identification, Brand and Model Analysis

The device shown in the visuals is a console-type, wheeled ultrasonography (ultrasound) system used for medical imaging purposes. The logos and model designations on the product have been clearly analyzed:

• Brand: MEDISON
• Model: SONOACE X8

The “MEDISON” brand is clearly visible on the lower frame of the device’s monitor, and the “SONOACE X8” model inscription is clearly legible on the lower part of the side panels. The device is an integrated system consisting of an imaging center, monitor arm, control panel, and probe (transducer) connection slots.

Areas of Use and Purpose

The identified Medison SONOACE X8 model is a device designed for general-purpose medical diagnostic imaging. It is used in specialties such as Radiology, Obstetrics and Gynecology (Gynecology/Obstetrics), Urology, and Internal Medicine for abdominal, pelvic, and superficial tissue imaging. Especially the intracavitary (vaginal/rectal) probe, which is attached to the system and shown closely in the visual, indicates that the device is actively used in gynecological and urological examinations.

Quantity and Accessory Information

The visuals show 1 unit of the main ultrasound console. The accessories integrated and connected to the system are as follows:

• A total of at least 2 ultrasound probes (transducers) are attached to the device.
• 1 Endocavitary Probe (the long, thin probe held in the visual).
• 1 Convex or Linear Probe (the other head attached to the probe slot).
• Integrated flat panel (LCD) monitor.
• Power cable (wound on the rear panel).

General Condition and Cosmetic Examination

The device is in used (second-hand) condition. Considering its manufacturing period and the color of the plastic components in the current visuals, it is understood that the device has a certain age. There is yellowing on the body plastics that has occurred over time. The device’s general casing is intact, but signs of wear are observed.

Physical Deformation and Wear Indications

The detailed visual inspection revealed the following deformations and signs of use:

• Wear on Probe Handle: On the handle part of the endocavitary probe held by a person in the visual, there are prominent black marks, friction traces, and color changes. This indicates that the probe has been used very intensively.
• Writing on Side Panel: On the bottom plastic base of the device, in the gray area, there is a handwritten inscription “KDOGP-07” in black marker pen. This is likely an internal asset or inventory tracking number.
• Plastic Surfaces: Accumulations of dirt and slight color tone differences (yellowing) are observed in places on the white/cream-colored plastic components.
• Cosmetic Scratches: Slight friction-induced superficial scratches/stains are present on the side panels (around the area where “SonoAce X8” is written).

Mechanical and Electronic Component Analysis

Mechanical Components: The device’s movable monitor arm mechanism appears sturdy, and the screen can remain in an upright position. The wheel mechanism is present at the bottom of the device, and the brake pedals are visible in the visual. The hanger arms used to prevent probe cables from dangling are in place.

Electronic Components (Control Panel and Screen):

• Screen: The monitor is in the off position. No cracks or breaks were detected on the screen surface, but cleaning marks or slight dust accumulation may be visible on the panel surface.
• Control Panel: The keypad (Trackball, TGC adjustment sliders, rotary knobs, and buttons) appears physically complete. The inscriptions on the keys (Patient, Probe, Sonoview, Freeze, etc.) are legible; there is no fading. However, dust/dirt may have accumulated between the keys over time.

Originality Assessment

The “Medison” logos, “SonoAce X8” model labels, the structure of the probe connection sockets, and the control panel layout on the device fully comply with original manufacturer standards. There is no indication of it being an aftermarket or assembled casing; the product is visually an original Medison system.

Potential Failure Risk and Warnings

Based on the visuals, the following points may be important for the buyer:

• Probe Cables: It should be thoroughly checked whether the probe cables have bends or crushes in their outer insulation. Since the cables are dangling in the visuals, tension at their base parts could lead to interference (noise) in image transmission.
• Cosmetic Wear: The intense wear marks on the endocavitary probe indicate that this probe has been disinfected and used very frequently. The integrity of the crystal structure and lens surface cannot be confirmed from the visuals, but its exterior cosmetics appear fatigued.

Conclusion and Summary

This report pertains to the Medison SONOACE X8 model ultrasonography device. While maintaining its physical integrity, the device is a second-hand medical equipment bearing extensive signs of use. At least two probes are attached to it. The handwriting on the bottom of the device suggests it may have originated from a corporate inventory. The screen and keypad are physically intact, but the wear on the probe handle indicates an active operational history of the device.