Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 10.04.2026
Report code: 1775832153
DP-2200Plus Model Ultrasound Device Analysis Report
Device Identification and Usage Area
The product in the image is an ultrasonography (ultrasound) device used for medical diagnosis and imaging purposes. The keypad, trackball, and screen interface indicate that it is designed for general ultrasound imaging procedures.
Brand and Model Information
The DP-2200Plus model designation is clearly legible on the frame located just below the device’s screen. There is no readable logo or text regarding the manufacturer of the device in the image.
Quantity Information
There is 1 ultrasound device main unit in the image.
General Condition and Physical Deformation
The outer casing of the device shows signs of heavy use. Specifically, there is noticeable dirt, staining, darkening, and discoloration on the plastic housing at the top of the screen. Dust and dirt accumulations are observed on the surface of the control panel and between the keys. No visible breaks or cracks have been detected on the device’s casing, but its overall condition is quite dirty.
Screen Analysis
The device’s screen is in working condition, and an ultrasound imaging interface is displayed on a black background. Chinese characters are predominantly used in the screen interface and menus. The system date and time are visible as 2000/01/01 00:02:31 in the top right corner of the screen. Ultrasound probe and imaging parameters such as B650 / MG50 / AP7 / IP4 / FR21 and 35C50EB 3.5M are located in the top center of the screen. Various numerical values are listed in the menu open on the right side. There are no visible physical cracks or scratches on the screen surface.
Control Panel and Mechanical Components
There is a keyboard with a standard QWERTY layout on the control panel. Yellow backlighting is active under the keys. Both English terms and Chinese characters are present on the keys. There are 8 TGC (Time Gain Compensation) sliders positioned vertically on the left side. A trackball is located in the bottom center. There are three rotary adjustment knobs (potentiometers) on the vertical panel to the right of the screen. No physical missing parts or breaks are visible on the keys, sliders, or knobs.
Accessories
On the right side of the device, a probe holder slot integrated into the body and a thick probe cable hanging down from this slot are visible. Since the tip of the probe (transducer) is not within the viewing angle, its condition cannot be evaluated.
Potential Failure Risk
The fact that the system date on the screen has been reset to the year 2000 indicates that the internal timer (CMOS) battery on the device’s motherboard is depleted. The heavy accumulation of dirt and dust on the control panel carries the risk of the keys losing their tactile sensitivity or causing sticking in the mechanical movements of the trackball.
