Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 01.11.2025
SIUI CTS-200 Ultrasound Device Analysis Report
Overview and Device Description
The device shown in the images consists of one ultrasound imaging device and one probe attached to it. Upon examination, it has been clearly identified that the product’s brand is SIUI and the main unit model is CTS-200. The accessory (probe) attached to the device also features the SIUI brand and model code EZU-PL21. The product is a portable ultrasonography system used for medical diagnostic purposes.
The products subject to this report are:
- 1 unit SIUI CTS-200 Ultrasound Device (Main Unit)
- 1 unit SIUI EZU-PL21 Ultrasound Probe
Upon examining the product’s logo, the print quality of the inscriptions, and the overall craftsmanship, it is assessed as original.
Physical Condition and Deformation Analysis
The general condition of the device has been assessed as used. Both the main unit and the probe’s plastic casing show a noticeable yellowing, understood to have occurred over time. Apart from this discoloration, no cracks, fissures, or significant impact marks were found on the device’s casing. Small scratches and smudges are observed on various surfaces. Especially in the grooves on the sides of the probe, there is some dirt accumulation. The device’s screen is off and physically shows no cracks, deep scratches, or damage.
Mechanical and Electronic Component Examination
All button sets on the device’s front panel appear complete and physically intact. No fading or wear has been observed on the buttons. The Power switch, mode selection buttons, and other function buttons are in place. The “ILLUM” labeled adjustment knob located at the bottom of the screen is also present. The slot designed for probe placement on the top of the device is in sound condition.
It is observed in the photos that the device is not operational, its screen is off, and the power light is not illuminated. Therefore, no comment can be made regarding the functionality of the electronic components. The only accessory attached to the main unit is the EZU-PL21 model probe with its cable. No crushing, breakage, or significant wear has been observed on the cable’s outer surface. No other cables, adapters, or accessories are present in the images.
Label Information and Technical Specifications
The legible information on the labels of the device and probe is listed below. No labels containing a serial number, lot number, or REF code were found in the images.
- Device Brand/Model: SIUI CTS-200
- Probe Brand/Model: SIUI EZU-PL21
- Probe Technical Information: 3.5MHz
Important Notes and Assessment
Since the device’s screen is off, no analysis of menus, operating hours information, or error codes can be performed. No accompanying documents (invoice, warranty certificate) or original box are present in the images. Therefore, no information regarding the year of manufacture or warranty status is available.
Regarding potential failure risks, no immediate risk factors such as crushed cables, cracked casing, or obvious damage have been observed, apart from general cosmetic wear (yellowing of the plastic casing) due to the device’s age. The product’s current physical condition is reasonable considering its age.
