Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 25.03.2026
Report code: 1774444362
Invacare Storm Powered Wheelchair Analysis Report
Device Identification and Basic Information
The product shown in the images is a powered wheelchair designed to provide mobility for individuals with physical disabilities or walking difficulties.
- Brand: Invacare
- Model: Storm
- Quantity: 1 powered wheelchair
- Area of Use: Used for adult patients to move independently indoors and outdoors.
- Size and Compatibility: Based on the proportions and design in the image, it is suitable for adult use.
Originality and General Condition
Upon examining the embossed logos on the device’s body, labeling standards, and part integrity, the product is deemed original. The device is in used condition. There are dust, dirt, and superficial wear marks due to use.
Physical and Mechanical Condition
Details observed on the device’s outer layer and mechanical components are listed below:
- Casing and Plastic Components: Superficial scratches and scuff marks are present on the blue plastic housing at the rear and on the side panels.
- Wheels: There are two large rear drive wheels with thick treads, two small front swivel wheels, and two small anti-tip wheels at the lower rear. Wear, dust, and dirt have been observed on the tire treads.
- Suspension: An orange-colored coil spring suspension system is present at the rear wheel connections. No physical damage or rust is visible on the springs.
- Seating and Backrest Area: A black fabric-covered seat cushion and backrest are present. Slight fraying and loose threads are visible on the edges of the backrest fabric. A black fabric bag is hanging on the rear of the backrest.
- Footrest: It is observed that the footrest mechanism located at the front right of the device is not fully mounted to the chassis and is supported by a wooden plate.
Electronic Components and Hardware
Visual observations regarding the device’s electronic components are as follows:
- Controller: A joystick module, providing steering and speed control with status indicator LEDs, is located on the right armrest. No readable text or error code is present on the screen.
- Lighting: Two red stop/parking lights are present at the rear, and two red reflectors are at the bottom. Orange-colored lighting/reflector modules are present on the side panels.
- Motor: A motor system integrated into the chassis is visible beneath the seating area. Standard warning labels are present on the motors.
- Cabling: Exposed cable connections, standing out, have been observed in the right rear hinge area where the backrest and seating area meet.
Label Information
The following information has been identified on the labels located on the device chassis:
- Serial Number: 19LKK068237G (Readable on two different white barcode labels on the rear chassis and side chassis).
- Other Labels: A green round control label and a white label with unreadable content are present at the rear.
Existing Faults and Potential Risk Assessment
The risks identified during the examination of the images are as follows:
- Footrest Mounting: The footrest not being fully attached to the chassis and resting on a wooden surface poses a safety risk during use. There is a high probability of missing or broken mounting connections for the part.
- Exposed Cables: Cables protruding from the right rear hinge area carry a risk of pinching, crushing, or breaking during movement. This situation could lead to electronic malfunctions.
