Secondhand Protec Compact 2 Automatic X-Ray Film Bath Device

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 04.09.2025

Kodak Prostar Film Processor Analysis Report

Overview and Device Description

The product shown in the images is a Kodak brand, Prostar model film processor device. Considering the general structure, design, and brand of the device, it is understood that it is used for bathing and processing microfilm in formats such as 16mm and 35mm. It appears to have a compact design suitable for desktop use.

Areas of Use and Functionality

This type of processor is typically used for the fast and secure processing of microfilms produced in archiving, librarianship, and various corporate environments. The internal mechanism in the images indicates a roller transport system that allows the film to pass through chemical baths and drying units.

Quantity Information

There is 1 unit of the Kodak Prostar film processor device in the images. No additional accessories or consumables are visible, other than the device’s own internal parts (top cover, internal chamber, and roller mechanism).

General Condition and State

The general condition of the device is assessed as used. Its white main casing has a generally clean and tidy appearance. However, some cosmetic flaws have been observed due to long-term use or environmental factors. It cannot be determined from the images whether the device is operational.

Physical Deformation

• Main Casing: No noticeable cracks, fractures, or deep scratches are observed on the device’s white plastic casing. The surface is generally well-preserved.
• Control Panel: There is a distinct yellowing on the plastic surface of the control panel located on the front right side of the device. This condition typically results from material aging over time or exposure to sunlight.
• Internal Chamber: The internal chamber and roller mechanism visible when the lid is opened appear clean. No adverse conditions such as rust or chemical residues have been encountered.

Mechanical and Electronic Components

Based on visual inspection, the following observations have been made regarding the mechanical and electronic components:

• Mechanical Parts: The hinges of the top cover and the internal chamber lid appear functional. There is no visible damage or missing parts in the internal metal roller structure and gear system.
• Electronic Parts: The control panel features a small digital screen and various function buttons. The screen is off, thus no comment can be made regarding the operability of the electronic system. The buttons are physically in place but may have slight signs of use.

Accessories and Missing Parts

External accessories such as power cables, water inlet/outlet hoses, or chemical solution containers, which might be necessary for the device’s operation, are not present in the images. Only the main unit of the device has been photographed. Therefore, it can be assumed that its external accessories are missing.

Labels and Technical Information

Apart from the writings indicating the brand and model name on the device, no labels or plates containing detailed technical information such as serial number, REF code, lot number, or year of manufacture are discernible in the images.

Potential Risk of Malfunction

The physical condition of the device is good for its age. No serious visible damage, rust, or cable crushing, indicating a potential malfunction, has been detected. However, the yellowing of the plastic on the control panel suggests that the device is an older model. The greatest risk stems from potential internal component failures that cannot be visually identified, possibly due to the electronic components not having been used for a long time. The device’s functionality cannot be known without testing.