Secondhand Migun HY-7000E Thermal Massage Bed

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 24.01.2026

MIGUN HY-7000E Thermal Massage Bed Analysis Report

Device Identification

The device shown in the visuals is a thermal massage bed designed for spinal health, used for physiotherapy and personal health purposes.

Brand and Model

Following an examination of the metal label on the side panel of the product, the brand and model information has been definitively identified.

• Brand: MIGUN
• Model: HY-7000E

The label clearly states the device’s description as “Thermal Massage Bed”. This information corresponds to a verifiable model online.

Authenticity

The metal label plate on the device, when examined for font characteristics, mounting screws, logo printing, and material quality, conforms to industrial standards. The product’s overall design lines and material workmanship reflect the original manufacturing quality of the MIGUN brand. No signs of counterfeit (such as irregular labels, low-quality printing, etc.) have been observed.

Usage Areas

This thermal massage bed is suitable for alternative medicine, physical therapy centers, beauty salons, or home use. It is primarily used for spinal massage, heat therapy (thermtherapy), and acupressure applications to achieve muscle relaxation, accelerate blood circulation, and provide general body relaxation.

Quantity Information

The visuals show 1 main massage bed unit. Additionally, immediately in front of the bed, there is 1 wooden-look piece (likely an external heater stand or headrest part).

General Condition

The device appears to be in “used” condition. Natural signs of use, developed over time, are present on the leather and fabric surfaces. However, the device retains its integrity and has a clean appearance.

Physical Deformation

There are no noticeable deep tears, cuts, or large stains on the orange artificial leather parts of the product in the photos. However, the beige mesh/fabric section in the middle of the bed has taken shape and become slightly loose due to the movement of the massage rollers underneath; this is a natural result of use observed in devices of this type. No breaks or cracks are visible on the plastic and metal side panels.

Mechanical System

Although the massage rails, which form the main mechanics of the bed, are not directly visible as they are beneath the fabric, the marks on the fabric indicate the presence and path of the mechanism. The visible cable input sockets and metal panel are securely mounted in place.

Electronic System

Upon examination of the control inputs and power connection points on the side panel:

• The socket inputs appear solid.
• A cable (likely for the remote control or an external heater) is plugged into the socket, and the connection point is supported by a protective rubber to prevent bending.

Accessories

Cables connected to the sockets on the side of the device are visible in the visuals. Additionally, in the last visual, a thick gray cable plugged into the device next to the text “CONN…” (CONNECT) is present. Next to the product, there is also a wooden-patterned, semi-circular accessory piece. The remote control itself cannot be clearly distinguished in the visual.

Battery Status

This device operates on mains electricity (230V). There is no information in the visuals or on the label indicating an internal battery. Therefore, battery status is outside the scope of this evaluation.

Label Information

The information on the metal label on the device’s side panel is as follows:

• DESCRIPTION: Thermal Massage Bed
• MODEL: HY-7000E
• MANUFACTURER: MIGUN MEDICAL INSTRUMENT CO., LTD.
• VOLTAGE: 230V~, 50Hz
• CONSUMPTION ELECTRICITY: 230W
• TEMPERATURE / TIME:
  • 40°C ~ 70°C (104°F ~ 158°F)
  • Automatic mode (14~34 minutes)
  • Manual mode (8 hours)
• Certifications: CE mark and WEEE (waste bin) mark are present.
• Address Information: 666-5 Ungam-ri Tong-Myon Yeongi-Kun Chungnam, KOREA.

Screen Analysis

There is no image of the device’s digital display or remote control screen in the visuals. Therefore, screen analysis could not be performed.

Size and Compatibility

The product is adult-sized. Its width and length are standard for a single massage bed. Based on the proportion of the socket and wall in the visuals, it is understood that a full-sized adult can comfortably fit.

Year of Manufacture

The label does not explicitly state a year of manufacture (Date of Manufacturing). However, based on the format of the address information and the model’s widespread availability in the market, it can be said to be an older/classic model.

Documents

No invoice, user manual, or warranty certificate for the product is visible in the visuals.

Usage Duration

It is not possible to determine the total operating hours of the device from the visual.

Existing Malfunction

The visual inspection reveals no physical evidence of malfunction, such as broken parts, disconnected cables, or damaged sockets.

Potential Malfunction Risk

In devices of this type, the most worn area is the central mesh section over which the massage balls move. The visuals show that this mesh has stretched due to use; in the future, tearing of this fabric could pose a potential risk. However, it does not currently appear to require urgent replacement. The absence of excessive bending at the cable’s socket connection points is a positive aspect.