Secondhand Vitlab Pipeo Pipette Controller

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 30.03.2026
Report code: 1774852248

VITLAB pipeo Pipette Controller Analysis Report

Device Identification and Application Areas

The product shown in the images is a pipette controller (pipettor) used for liquid aspiration and dispensing in laboratory environments. It is suitable for liquid transfer in chemistry, biology, and medical laboratories, compatible with standard glass or plastic pipettes.

Brand and Model Information

The brand and model were identified by examining the inscriptions on the device body, its original box, and the user manual.

• Brand: VITLAB
• Model: pipeo

General Condition and Physical State

The device is located within its original box and packaging tray. No scratches, cracks, dents, dirt, or discoloration were observed on the gray and red plastic body of the device. Cosmetically, it is in a very clean and new/lightly used condition. Slight friction and wear marks are present on the corners and edges of the outer cardboard box.

Mechanical and Electronic Components

The red trigger buttons, indicated by directional arrows (up and down) that control liquid aspiration and dispensing on the device, appear physically sound. The pipette inlet (red nose piece) is undamaged. There are no breaks, bends, or deformations in the pins or plastic casings of the power adapter and interchangeable plug heads used for charging the device. No crushing or peeling is present on the cables.

Accessories and Box Contents

The total number of parts and accessories identified from the images is as follows:

• 1 VITLAB pipeo pipette controller main body
• 1 power adapter (charger)
• 3 interchangeable plug adapter heads (for different countries/standards)
• 2 spare membrane filters in sealed blister packaging
• 1 original user manual (Gebrauchsanleitung / Operating Manual)
• 1 original storage box and inner plastic tray

Label and Technical Specifications

The technical information and codes found on the packaging of the spare membrane filters are as follows:

• Part Description: Ersatz-Membranfilter / Spare membrane filter
• Specifications: 0.2µm, sterile, hydrophobic, PTFE
• Maximum Autoclave Temperature: 130°C max. 5x
• Housing Material: Gehäuse / housing: PP
• Expiration Date (EXP): 2022-11
• Lot Number (LOT NO): 1750B 91737103

The user manual contains the German address and contact information of the manufacturer, VITLAB GmbH.

Authenticity Assessment

Considering the box design, the print quality on the device, the professional printing of the user manual, and the packaging standards of the accessories, the product is assessed to be original.

Potential Malfunction Risk and Warnings

No damage or potential malfunction risk has been observed on the device body, electronic adapter, or mechanical buttons. The overall condition of the device is very good. However, it has been determined that the expiration date (EXP: 2022-11) of the 2 spare membrane filters included in the box has passed. While this does not prevent the device from operating, it indicates that there may be a loss of performance in the sterilization and hydrophobic properties of the filters.