Secondhand Asclepion TattooStar R Aesthetic Laser Device

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 15.07.2025

TattooStar R Laser Device Analysis Report

Overview and Product Description

In the images, there is a laser device that appears to be used for professional aesthetic applications. The device consists of a main body with wheels, an articulated arm attached to this body, and an application head (handpiece) at the end of the arm. Based on the product’s name “TattooStar,” it is understood to be designed for tattoo removal and similar dermatological laser procedures. The device is seen to be generally used in a professional setting such as a clinic or a beauty center.

Brand and Model Identification

On the front panel of the device, in the upper left corner of the screen, the phrase TattooStar R is clearly legible. Based on this information, the product’s brand has been identified as TattooStar and its model as R.

Physical Condition and Deformation Analysis

The overall condition of the device is used, but good. The points noted during the physical inspection are as follows:

• Casing: There are a few minor scratches and paint chips on the front and side parts of the device’s red lower body, particularly near the ground. The upper white tray surface is clean and free from noticeable deformation.
• Screen: The device’s screen is off. Therefore, no comment can be made about its operational status or pixel errors. There are no visible cracks or deep scratches on the screen surface.
• General Cleanliness: The product has a generally clean and well-maintained appearance.

Mechanical Components and Accessory Evaluation

Upon visual inspection of the device’s mechanical parts and accessories, no missing or broken parts were found. The item consists of one main unit and one application arm.

• Articulated Arm and Handpiece: The articulated arm that directs the laser beam and its joints appear structurally sound. The application handpiece is properly placed in its holder on the upper tray.
• Control Panel: The emergency stop button, key switch, and adjustment knob located on the front panel are physically in place and show no signs of damage.
• Accessories: The device’s power cord is visible and connected to the device. No other accessories, such as protective goggles or a foot pedal, are visible in the images.
• Socket Ports: There are two socket ports on the front panel of the device, located below the emergency stop button. No cables are plugged into these ports.

Technical Information and Labels

No technical labels, which might be on the rear or underside of the device, are visible in the images. Therefore, specific information such as the Serial Number, Lot Number, REF Code, or Year of Manufacture could not be obtained. As the device’s screen is off, data such as usage hours were also inaccessible.

Potential Risk Assessment

In the inspection based solely on the images, no serious risk that would directly affect the device’s operation has been observed. The minor scratches and paint chips on the casing are purely cosmetic and do not indicate a functional defect. There is no critical damage such as crushing, tearing, or burns on the articulated arm or cables. The overall condition of the device suggests that it has been regularly used and well-maintained. It should be noted that this assessment is a projection based only on visual evidence and does not guarantee the full performance of the device’s electronic and mechanical components.