Secondhand Smart Touch Diode Laser Epilation Device

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 03.01.2026

Laser Hair Removal or IPL Skin Care Device Analysis Report

Device Identification and General Features

The product in the image is an aesthetic operation device designed for professional beauty centers and aesthetic clinics, in a vertical format (wheeled stand type). Upon examining the device’s general design language, ergonomics, and handpiece structure, it has been determined that this product is a Laser Hair Removal or IPL (Intense Pulsed Light) system. The device features a large touch control panel on its front face and generally has a white plastic composite outer casing.

Hardware and Technical Component Analysis

The main hardware and control mechanisms identified on the device are as follows:

• Control Panel: On the upper part of the device, there is a large touch screen area positioned at an inclined angle for operator use. The screen is off (black).
• Safety Hardware: Two important safety components are located within a silver-colored frame on the device’s left front panel. In the upper part, there is a keyed contact input to prevent unauthorized use, and directly below it, a red Emergency Stop Button used to cut off system power in emergencies.
• Applicator (Handpiece) and Transmission Line: A single treatment handpiece is vertically suspended on the right side of the device. This handpiece is white and has a trigger mechanism. The handpiece is connected to the device by a thick, gray, flexible, and spiral protective hose. At the tip of the handpiece, a rectangular yellow/gold colored window or filter area, which enables light transmission, is visible.
• Cooling System: On the lower side panels of the device, ventilation grilles and a fan outlet point have been identified, designed to ensure air circulation for the internal electronic components and cooling motor.

Areas of Use

These types of devices are used in the medical aesthetic and beauty industry due to their hardware specifications. The handpiece structure and general configuration of the device indicate its suitability for the following procedures:

• Permanent hair removal applications.
• Skin rejuvenation treatments.
• Spot and pigmentation treatments (if it has IPL technology).

Quantity Information

The image shows 1 unit of the main device body and 1 unit of the application handpiece integrated with the device. Although a second handpiece slot or support arm mechanism is visible on the upper left side, a second handpiece attached there is not clearly discernible in the image.

Physical Condition and Cosmetic Examination

The outer casing of the device is made of white glossy plastic material, and its general cosmetic condition appears good.

• Casing Integrity: No visually identifiable breaks, deep cracks, or fragmentation are present on the body. No significant deformation has been observed on the silver-colored details and handling bars on the sides.
• Color and Surface: No significant yellowing or excessive color fading has been detected on the white plastic surfaces; the device has a clean and well-maintained appearance.
• Mechanical Components: The hanger bracket holding the handpiece appears sturdy. The handling bars on the sides of the device are in place and designed to provide maneuverability during transport.

Cables and Connections

The main handpiece hose (gray spiral cable) appears intact; there are no visual signs of breakage or tears in the outer sheath. Black cables are visible on the floor, extending towards the rear bottom part of the device; these are likely the device’s power cables, but their connection points are not clear.

Screen Status

The device’s screen is off. Therefore, an analysis of pixel errors, touch sensitivity, or software version cannot be performed based on the visual inspection. No cracks or fractures are visible on the screen glass.

Current Fault and Risk Analysis

As a result of the visual inspection, no concrete findings that could be described as “faulty” (e.g., broken parts, disconnected cables) have been encountered in the device’s casing or external hardware. The device appears to be in sound physical condition.

Conclusion Evaluation

Although a second-hand product, it is a professional aesthetic device appearing in good physical condition, with a clean outer casing and complete hardware (for the single handpiece present). Specific technical values (e.g., joule power, shot count) could not be determined due to the absence of brand and model labels in the image, but from a visual integrity standpoint, the device appears ready for use.