Secondhand Aeonmed VP300 Sevofluran Vaporizer

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 30.07.2025

Aeonmed VP300 Sevoflurane Vaporizer Analysis Report

Overview and Device Description

The device shown in the images is a vaporizer used in medical anesthesia applications. According to the labels on the device, its brand has been clearly identified as Aeonmed and its model as VP300. The product is designed for use with the anesthetic agent “Sevoflurane.” Considering the quality of the labels and logo printing on the device, the workmanship of the parts, and the overall material structure, the product is assessed to be genuine.

Quantity Information

The images show 1 (one) unit of the Aeonmed VP300 Sevoflurane Vaporizer. No accessories or additional parts other than the device itself are present in the images.

Intended Use

This device is integrated into anesthesia machines to vaporize the liquid Sevoflurane anesthetic agent and add it at a specific concentration to the gas mixture administered to the patient via inhalation. It is typically used in operating rooms during general anesthesia procedures.

Physical State and Condition

The device is generally in good condition and has a used appearance. It is not a new or unused product but does not show heavy wear. Some signs of use are present on its surface.

• Casing: On the device’s white and gray plastic casing, there are minor scratches and small scuff marks, especially on the corners and edges.
• Cleanliness: On the surface of the device, particularly on the front white panel, slight dirt and stains are noticeable.
• Deformation: No cracks, breaks, dents, or significant discoloration have been detected in the images.

Mechanical Component Assessment

The mechanical parts of the device appear to be intact and functional based on visual inspection.

• Control Dial: The gray dial located on the top, used for adjusting the anesthetic concentration (VOL%), is in place. The “OFF” position, release button, and percentage scale on it are clearly visible.
• Filler Cap: The cap for the anesthetic agent filling port on the front of the device is present. The cap is attached to the device with a black safety strap to prevent its loss.
• Liquid Level Indicator: The transparent liquid level indicator on the front face is intact and shows no signs of leakage or cracks.

Label Information

There are labels on the device indicating the brand, model, and intended use. However, a label containing detailed manufacturing information such as a serial number, lot number, or REF code is not visible in the images.

• Brand: Aeonmed
• Model: VP300
• Anesthetic Agent: Sevoflurane
• Warning Label: On the control dial, there is a yellow label containing operating instructions and warning pictograms. The text on this label is too small to be read.

Accessories and Additional Parts

In the images, apart from the device itself, no accessories such as connection hoses, mounting hardware, or a user manual are present.

Potential Risk Assessment

Based on the inspection of the available images, no obvious damage or critical wear that would directly compromise the device’s functionality has been observed. The minor scratches and dirt on the casing are cosmetic imperfections resulting from normal use. The device’s mechanical components appear to be in place and intact. No conditions that could pose a potential risk of failure, such as severe rust, crushed cables, or broken parts, were found.