Secondhand Aeonmed VP300 Sevoflurane Vaporizer

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 30.07.2025

Aeonmed VP300 Sevoflurane Anesthetic Vaporizer Analysis Report

Overview and Product Description

The device shown in the images is an anesthetic vaporizer used with anesthesia machines. Based on the labels on the device, it has been clearly identified that the brand is Aeonmed and the model is VP300. This specific model is designed for the Sevoflurane anesthetic agent. Vaporizers vaporize the liquid anesthetic agent, allowing it to be delivered to the patient via inhalation at a precise and adjustable concentration. There is a total of 1 Aeonmed VP300 vaporizer in the images.

Physical State and Condition

The overall condition of the device appears to be very good and clean. It gives the impression of a lightly used or well-maintained product. No significant physical deformation has been observed on the product’s casing or other components.

• Casing and Surface: The device’s white and gray plastic casing is clean. There are no noticeable scratches, cracks, dents, or discoloration.
• Labels: The brand, model, and warning labels are complete, legible, and in good condition. There are no signs of wear or peeling. There is a green label on the side of the device, but its content is illegible.
• Cleanliness: The product generally appears free of dust and dirt.

Mechanical and Technical Evaluation

Upon visual inspection of the device’s mechanical parts, no issues have been identified. The parts appear complete and functional.

• Control Dial: The yellow concentration control dial located on the top is intact. The percentage values between “OFF,” “0.5,” and “8” on it are clearly legible. The white release button in the center of the dial is in place.
• Filler Cap: The anesthetic agent filler cap on the front and the black safety tether connecting it to the device are present and appear intact.
• Locking Mechanism: The locking (Lock/Unlock) lever on the side, which secures the device to the anesthesia machine, is in place and shows no signs of damage.
• Inlet/Outlet Ports: Although the ports where the device connects to the anesthesia machine are not clearly visible in the image, there is no obvious crack or damage on the connection interface.
• Accessories: No additional accessories (box, cable, user manual, etc.) other than the device itself are present in the images.

Label and Identification Information

The brand and model information are clearly stated on the device’s labels. However, detailed technical information such as the serial number or year of manufacture could not be obtained from the images.

• Brand: Aeonmed
• Model: VP300
• Anesthetic Agent: Sevoflurane
• Warnings: The yellow label on the top contains warnings in English, stating that the user manual should be consulted.

Potential Risk Assessment

Based on visual inspections, no obvious defects that would pose an immediate risk of failure (such as cracks, fractures, rust, crushed cables, etc.) have been detected on the device. The product’s clean and well-maintained overall condition suggests it has been properly stored. The visual integrity of the mechanical parts is intact. This indicates that the device’s current condition is good.