Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI agent. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 04.11.2026
Report code: 1793782203
NUVE NC 23B Autoclave Device Analysis Report
Device Identification and Basic Information
The device shown in the images is a desktop steam autoclave used in medical and laboratory sterilization processes. The brand of the product is Nüve, and the model code is identified as NC 23B. This brand and model information is located on the front panel and the body of the device.
- Brand and Model: Nüve NC 23B
- Quantity Information: The images show 1 autoclave device, along with 3 trays and 1 tray carrier rack system located inside the chamber.
- Authenticity: Upon examination of the brand logos, digital display interface, and label details on the device, it is observed to be authentic.
Usage Areas and Purposes
This device is used for the purpose of sterilizing medical instruments, glassware, and laboratory equipment with high-pressure steam. It is suitable for use in health centers, dental clinics, and laboratories.
General Status, Condition, and Physical Features
The outer casing of the device is generally clean and in good condition. There is a black circular locking mechanism and handle on the front left side. When the lid is opened, it is seen that the inner chamber is made of stainless steel.
- Physical Deformation: There are no significant dents, cracks, or discoloration on the metal surface of the outer body. The sealing gasket around the lid is in place.
- Mechanical Components: The front lid opening/closing mechanism and the locking handle move smoothly. The metal trays and the carrier wire rack inside are in place.
- Electronic Components and Display: There is a color digital display on the upper right side of the device, with F1, F2, F3, and F4 function keys located below it. The screen is actively working and clearly displays the current temperature value of 23.5 °C, the pressure value of -0.02 Bar, and the system status messages. Additionally, the test screen shows the warning “VACUUM TEST SUCCESSFUL!” and the data “LEAK RATE: 0.6 mBar/min”.
Accessory and Battery Status
Inside the device, there are 3 perforated metal trays and a stainless steel wire rack system that carries these trays. The device does not contain an internal or external battery; it operates directly on mains electricity.
Label, Text Inventory, and Screen Data
The text and label information on the device in the images are as follows:
- Front Panel and Body Text: The Nüve logo is located in the top left corner, and the NC 23B model code is in the bottom left corner. Information regarding the Setra Technical Service label is available in the bottom right corner.
- Warning Labels: On the inner lid, there is a “WARNING! HOT SERVICE DİKKAT! SICAK YÜZEY” warning text written in black letters on a yellow background. This warning indicates that the surface is hot while the device is operating or afterward and should not be touched.
- Screen Data: The date information is 17.09.2026, time is 16:23:22, temperature is 23.5 °C, pressure is -0.02 Bar, the message “GENERAL 134°C SYSTEM READY” is displayed, and the labels for the touch function keys are present. On the vacuum test screen, it is stated that the leak rate is 0.6 mBar/min.
Dimensions, Compatibility, Year of Manufacture, and Documents
There is no direct millimetric data regarding the physical measurements or dimensions of the device in the images. The year of manufacture cannot be read clearly from the label; however, the modern digital display design and the N-SmArt screen software infrastructure indicate that the device was produced in a period with current technology. There are no invoices, warranty certificates, or printed user manuals in the images.
Usage Duration, Existing Faults, and Potential Risks
The total operating hours information is not provided on the device screen. No existing faults such as broken parts, severed cables, or error messages were detected during the visual inspection. The successful result of the vacuum test indicates that the system is functioning properly in terms of sealing. No concrete risks such as significant wear, rust, or crushing were observed on the device’s casing or cables; it is in good condition.
