Secondhand Tuttnauer 2340EK 19 Liters Autoclave

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 19.08.2025

Tuttnauer 2340 EK Autoclave Steam Sterilizer Analysis Report

Overview and Product Description

The device shown in the images is a Tuttnauer brand, 2340 EK model autoclave steam sterilizer. Such devices are used for the sterilization of medical, dental, or laboratory instruments using high-pressure steam. The product’s brand and model are clearly visible on both the device’s front panel and its technical information label. The logo, label quality, and craftsmanship details in the images indicate that the product is original. One autoclave device was examined as part of the analysis.

Physical Condition and Deformation Analysis

The general condition of the device is assessed as used. On the outer casing, especially on the white and beige plastic parts, color yellowing is observed due to time or environmental factors. There is no significant rust or dent on the metal body of the device. The sterilization chamber located inside the front cover has a bright and clean appearance, but it may have fine scratches or water stains from use. The edges of the technical information label on the rear side are slightly peeling. No severe deformation such as cracks or breaks has been detected on the device overall.

Technical Specifications and Label Data

The technical label on the device provides important data related to the product. According to this information, the device was manufactured in 2007. The details on the label are listed below:

• Model: 2340EK
• Serial Number (S/N): 2605623
• Manufacturing Year (YEAR): 2007
• Capacity (CONT): 19 L
• Maximum Pressure (max. pr): 2.80 bar
• Test Pressure (test pr): 4.30 bar
• Electrical Supply: 230 V~, 9.6 A, 50/60 Hz, 1 Ph
• Protection Class: IP 31, PROTECTION CLASS 1
• Compliance: CE 0062, PED 97/23 EEC

The label also includes information that the manufacturer is based in Israel. Since the device’s screen was off, no operational data or error code analysis could be performed.

Accessory and Hardware Condition

The visual inspection shows some hardware that came with the device or is understood to belong to it. Metal shelves or trays are present inside the sterilization chamber. Additionally, an electrical power cord and plug connected to the device are also present. No other external accessories (user manual, original box, etc.) were detected in the images.

Potential Risk Assessment

Considering the device’s manufacturing year (2007), it can be said to be technologically old. Yellowing on plastic parts is a cosmetic condition indicating material wear over time and may not pose a direct failure risk. No situation requiring immediate intervention, such as crushed cables, rust on critical parts, or breaks, was detected in the images. The general condition of the device appears reasonable for its age. However, as with any used medical device, maintenance and calibration by a professional technical service are recommended for safe and efficient use.