Secondhand Hettich EBA 20 8 Tubes Fixed Angle Rotor Centrifuge

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 22.07.2025

Hettich EBA 20 Centrifuge Device Analysis Report

Overview and Device Description

The product shown in the images is a centrifuge device used in a laboratory setting. From the labels and inscriptions on the device, it is clearly identified that the brand is Hettich and the model is EBA 20. The device functions by spinning samples at high speed to separate substances within them according to their density. The product’s workmanship, logo, and label quality suggest that it is an original unit. One centrifuge device is present in the analyzed images.

Physical State and Condition Assessment

Despite being used, the device is generally in a clean and well-maintained condition. No significant scratches, cracks, dents, or color fading are observed on its white and blue-green casing. The transparent lid on the top is also intact and free of any significant deformation that would obstruct the view. The rubber feet on the bottom of the device are complete and in a condition to ensure the device’s stability. Its overall condition is considered to be quite good for its age.

Technical Specifications and Label Information

Important technical information is found on the labels located on the rear surface and the inner rotor section of the device. This information provides details about the device’s performance capacity and operating conditions.

• Brand: Hettich Zentrifugen
• Model (Typ): 2002
• Serial Number (Werk Nr.): 0068491
• Year of Manufacture (Baujahr): 2006
• Origin: Made in Germany
• Power Requirement: 208-240V ~ 50-60 Hz
• Current: 0.28A
• Maximum Speed (zul. Drehzahl): 6000 U/min (RPM)
• Maximum Density (zul. Dichte): 1.2 kg/dm³
• Rotor Capacity: 8 x 15ml (REF 1028)
• Other Codes: The device has a “CE” mark and a green label with the number 158.

Electronic and Mechanical Components Analysis

The front panel of the device features digital displays for setting the speed (RPM x 100) and time (t), along with “START,” “STOP,” and adjustment buttons. Since the device is not in operation in the images, the functionality of the screens and buttons cannot be commented on, but they appear to be physically undamaged. The 8-place angle rotor (8×15 ml capacity) inside the device is in a clean and undamaged condition. The rear panel contains the power cord inlet and the on/off switch. The power cord is not present in the images.

Potential Risk Assessment

Based on visual inspection, no obvious deformation, rust, or damage that would pose an immediate risk of malfunction has been detected on the device. As the device was manufactured in 2006, a definitive comment on the service life of its electronic and motor components cannot be made; however, its good external condition may indicate that it has received regular maintenance or has been used sparingly. The overall condition of the device suggests it would offer reliable use, provided it is in working order. This assessment is a forecast based solely on visual evidence, and it is recommended that the device be tested electrically and mechanically for a definitive determination of its condition.