Secondhand Nüve NF 815 8 Tubes Swing-out Rotor Centrifuge

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 15.08.2025

Nüve NF 815 Centrifuge Analysis Report

Overview and Product Identification

The device shown in the images is a laboratory centrifuge. The brand of the product is clearly identified as Nüve on the front control panel and rear label, and the model as NF 815. The device operates on the principle of separating substances of different densities within a liquid by rotating them at high speed, and is commonly used in medical or industrial laboratory environments. One centrifuge device is present in the images.

Physical Condition and Deformation Analysis

The overall condition of the device has been assessed as used. There are scratches, minor paint chips, and wear and tear due to use on its metal body in places. Wear marks due to use are also observed on and around the front control panel. Dust and dirt accumulations are present throughout the device. The manufacturer’s label located on the rear has worn out over time and has stains on it. Overall, it is in a condition appropriate for its age and intended use.

Mechanical and Electronic Components

Upon visual inspection of the device’s mechanical components, the top lid, its hinge, and the locking mechanism are observed to be in place. The inner rotor (spinning head) and tube slots are present when the lid is opened. The fact that the color of one of the tube adapters inside the rotor (orange) is different from the others suggests that this part might have been replaced later. The TIMER and SPEED adjustment knobs on the front panel, along with the green power switch, are physically intact. The device’s power cable is attached to the body. No broken or damaged cables were identified in the images.

Label Information and Technical Details

The following technical information can be read on the metal label located on the rear surface of the device:

• Brand: Nüve Sanayi Malzemeleri İmalat ve Ticaret A.Ş.
• Device Name: Centrifuge
• Type (Model): NF 815
• Serial Number: 01-1013
• Power Supply: 220V 50Hz
• Maximum Speed: 4000 RPM
• Year of Manufacture: 1995

Additionally, there is another yellow label below the main label with the warning: “CAUTION! Always operate the device with a grounded outlet.”

Potential Risk Assessment

No obvious signs of malfunction such as a break, crack, or burn mark that would prevent the device from operating were detected in the images. The overall condition of the device can be considered normal given its age. However, due to its manufacturing year of 1995, it should be considered that its mechanical and electronic components might be nearing the end of their service life. Periodic maintenance may be required for the device to operate problem-free for a long time. Since no significant wear or damage was observed, the potential risk of malfunction in its current state is assessed as low.