Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 21.05.2026
Report code: 1779358194
800D Model Centrifuge Device Analysis Report
Device Identification
The product in the images is a centrifuge device used in laboratory environments to separate liquid samples into their components.
Brand and Model
The model number is clearly read as 800D on the label on the front panel and the technical information label on the back of the device. No specific brand logo or name belonging to the manufacturer could be identified in the images.
Usage Areas
This device is used in biochemistry, microbiology, medicine, and general laboratory work for the precipitation and separation processes of biological fluids such as blood and urine, or various chemical mixtures. The capacity of the device is limited to 6 tubes of 20 ml each.
Quantity Information
The images show 1 centrifuge device and 1 power cable integrated into the device.
General Condition and Physical Deformation
The outer casing of the device is made of cream-colored plastic. There is slight soiling and dust on the casing due to use. Slight peeling is observed at the edges of the control label on the front panel. The general condition of the device is used, but no cracks, fractures, or deep impact marks have been detected on the body.
Mechanical Components
There is a transparent plastic lid on the top of the device. On the front panel, there are two gray rotary knobs (potentiometers) for time and speed adjustment. There are black rubber feet under the device to prevent vibration. The mechanical condition of the lid hinge and the knobs cannot be determined from the image.
Electronic Components and Accessories
A black power cable extending from the back of the device and a standard plug at the end are visible. No cuts or crushing that would compromise the integrity of the cable sheath have been detected. Inside the device, there is a metal rotor with 6 tube slots. The rotor slots are numbered.
Label Information
The silver-colored label on the back surface of the device contains the following technical information:
- Model: 800D
- Capacity: 6x20ml
- Power Supply: 220V 50Hz
- Production Date: 2017.12
- Serial Number: 71212652
The label on the front panel contains the following performance information:
- Maximum Speed: 4000 rpm
- Maximum RCF: 1790xg
Dimensions and Compatibility
The rotor capacity of the device is compatible with 6 standard 20 ml laboratory tubes.
Production Year
According to the information on the back label of the device, the production date is December 2017.
Existing Faults and Potential Risk of Failure
There is no clear evidence of a fault such as a broken part or physical damage in the images that would prevent the device from operating. The external condition of the device is good. Due to it being a 2017 model and having been used, there may be wear and tear on the motor brushes or electronic circuit components over time, but no serious risk has been detected in the visual analysis.
