Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 19.12.2025
BASCO Model 005 Cryotherapy Device Analysis Report
Device Identification and Areas of Use
The product analyzed in the visuals is a portable cryotherapy (cryo cautery) set used for tissue freezing procedures (cryosurgery) in medical interventions. The device has a modular structure consisting of a pressure regulator, a connecting hose, a trigger-mechanism gun part, and an application probe. Such devices are used in dermatology, gynecology, urology, and general surgery branches for the freezing treatment of conditions such as warts, calluses, skin lesions, and cervical erosion.
Brand and Model Information
As a result of a detailed examination of the images, the brand and model information of the product have been clearly identified:
- Brand: BASCO
- Model: Model 005
- Place of Manufacture: Chennai / INDIA (Stated on the label on the gun)
The inscriptions “BASCO NON SILENCER” and “MODEL : 005” are clearly visible on the metal plate located on the regulator, and the expression “MOD – 005 BASCO” is clearly legible on the round blue-white label on the red gun body.
Parts and Hardware Analysis
The set, placed in the foam slots within the black carrying case, consists of the following main parts:
- Application Gun (Cryo Gun): Red colored, trigger-mechanism body. It has a securing latch on the upper part and a white-coated, metal-tipped probe at its end. At the rear of the gun, there is a blue hose inlet that provides gas flow.
- Pressure Regulator: Consists of black and chrome-plated metal. It has a screw mechanism (yoke system) for cylinder connection. A manometer showing gas pressure is located on it. The inscription “NON SILENCER” indicates that the product is a non-silenced version.
- Connecting Hose: A pressure-resistant, blue flexible hose that provides gas transfer between the regulator and the gun. Metal protective springs are used at the connection points.
- Probe (Tip): A cryotherapy probe with a white shaft and a conical metal tip, screwed onto the end of the gun.
- Accessories: A blue plastic-handled hand tool (wrench/tightening tool) and a green round gasket/cap, presumed to be a spare, are present.
Label Data and Technical Indicators
The technical writings and labels on the product are as follows:
- Identifier Barcode/Serial Code: A white label with “CRY0005-520” is located on the gun. This is the device’s serial number or stock reference code.
- Manometer (Pressure Gauge): The gauge connected to the regulator is UDAY brand. The gauge scale is in the range of 0 to 3000 lb/in² (PSI). On the dial, “CHANGE CYLINDER” (Red area) and “WORKING PRESSURE” (Green/Yellow area) indications specify the operating pressure ranges with color codes. The gauge currently reads “0”.
Overall Condition, Cosmetics, and Physical Condition
The condition analysis of the device, based on the visuals, is as follows:
- Cosmetic Condition: The product is in a new (zero) or unused condition. No scratches, stains, yellowing, or signs of use were found on the red plastic body, the white coating of the probe, the metal regulator components, or the blue hose. Chrome parts are shiny and show no signs of corrosion.
- Protection: The product is contained within a black, zippered case with custom-cut white foam/sponge padding. No soiling or deformation is observed in the sponges, which proves that the device has been very well preserved.
- Deformation: No physical breakage, crack, dent, or deformation has been detected. The hose connection points and springs are intact.
Authenticity Assessment
The print quality of the labels on the product, logo placements, consistency of the BASCO brand model number, and material quality indicate that the product is an original BASCO production.
Missing Parts and Accessory Information
A total of 5 parts (Gun+Hose, Regulator, Probe, Hand Tool, Green Gasket) are visible inside the bag. The slots in the visual are fully occupied; there is no visibly empty slot for a missing part. The gas cylinder is an external component and therefore not included in this set. The set is ready to be connected to a cylinder.
