Secondhand Karl Storz 0 Degree Endoscope Telescope

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 18.02.2026

KARL STORZ Rigid Endoscope (Optic) Analysis Report

Device Identification

The product shown in the visuals is a professional rigid endoscope (medical optic/telescope) device used in medical imaging and surgical interventions. The device consists of an optical system that enables the visualization of internal body areas, and a protective tube used to house this optic.

Brand and Model Information

The laser markings on the product and packaging details have been carefully examined:

• Brand: The KARL STORZ logo is clearly legible on the body of the product near the lens section and on the flap of the packaging box. Furthermore, the inscription “Germany” is located beneath the brand name, indicating that the product is of German origin.
• Serial/Model Identifiers: The inscription “AUTOKLAV” (autoclavable) is visible on the metal body of the device. The last digits of the model or catalog number appear on the metal surface as “…65 AA” or a similar code sequence (The estimated full model code is not written as the beginning of the code is not fully legible due to the angled position in the visual). However, the “AA” suffix is a standard coding structure frequently used in Karl Storz products to indicate autoclavable optics.

Authenticity Assessment

The clarity of the brand marking on the device, the neatness of the font characters, and the material quality (polished stainless steel body) indicate that the product is an original KARL STORZ production. Furthermore, the inscriptions “Qualitätssicherung – Optik” (Quality Assurance – Optic) and its English equivalent “Quality Assurance Dept. – Optic” on the box confirm that the product has passed through the quality control department and is in corporate packaging.

Areas of Use

This product is designed for use in minimally invasive surgery (Laparoscopy, Cystoscopy, Arthroscopy, etc.) or diagnostic examinations. It enables the visualization of body cavities by connecting to a light source (via a fiber optic cable) and a camera system, or directly to the eye.

Quantity Information

The following parts have been identified in total in the visual:

• 1 rigid endoscope (Optic).
• 1 protective plastic sterilization/storage tube.
• Original carton packaging with styrofoam support.

General Condition and Cosmetic Examination

The overall condition of the product gives the impression of being new or factory refurbished:

• Metal Surfaces: The stainless steel shaft of the endoscope is smooth and polished. No bending, breakage, corrosion, or discoloration has been observed.
• Connection Points: The light cable input adapter and the ocular (eyepiece) section are clean. The paint of the green ring on it is vibrant and undamaged.
• Cosmetic Flaws: No scratches, impact marks, or wear due to use have been detected on the device.

Mechanical and Physical Characteristics

Technical details based on visual analysis are as follows:

• Material: Surgical-grade stainless steel body.
• Light Input: Standard screw-type light cable adapter is present.
• Color Coding: A distinctive green ring is located at the light post connection point. (This ring is typically used in Karl Storz systems to indicate the viewing angle or compatibility).

Accessories and Protective Tube

Next to the device, there is a protective tube made of hard gray plastic:

• The tube has ventilation holes (for steam/gas penetration during the sterilization process).
• The bottom part of the tube features “LOCK” and “OPEN” markings with directional arrows, indicating a mechanism that allows the optic to be securely locked for storage.
• The protective tube is also clean and undamaged, just like the device.

Label and Packaging Information

Texts located on the flap of the box:

• Text: Qualitätssicherung – Optik / Quality Assurance Dept. – Optic
• This inscription is an important detail certifying that the product has directly come from the manufacturer’s quality control unit and complies with standards.

Potential Failure Risk and Warnings

Based on the available visuals, there are no signs of any breakage, cracks, bending, or malfunction in the product. The product is in physically excellent condition. However, rigid endoscopes have very sensitive optical (lens) systems. Even if the metal body appears intact from the outside, connecting the device to a light source and testing its image quality is always a recommended procedure to clearly understand the condition of the internal lens system (rod lens). Visual analysis only confirms the flawless external physical integrity.