Secondhand Richard Wolf 24.26 Passive Working Element

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 22.09.2025

Karl Storz Resectoscope Set Analysis Report

Device Identification and Intended Use

The images show three parts belonging to a resectoscope set used in endoscopic surgical procedures. This set consists of one working element and two sheaths. Such instruments are typically used in medical fields like urology or gynecology for tissue cutting or coagulation (hemostasis).

Brand Information

On one of the metal parts shown in the images, the brand “Karl Storz” and the phrase “Germany” are legible. Based on this visual evidence, the product’s brand has been definitively identified as Karl Storz. A code or writing indicating the specific model of the product cannot be clearly understood from the images.

Quantity Information

A total of 3 units of medical instrument parts are shown in the images. These parts are:

• 1 black-colored working element with a finger and hand grip mechanism.
• 2 metal-bodied sheaths of different sizes and features.

General Condition and Physical Deformations

The overall condition of all parts constituting the product set is assessed as good. The parts have a clean and well-maintained appearance, giving the impression of being lightly used. Metal surfaces are shiny, and no fading or wear is observed on the plastic parts of the black working element. No noticeable physical deformation such as scratches, dents, cracks, rust, or stains has been detected on any part of the products.

Mechanical Component Examination

Upon visual examination of the mechanical components of the parts, no issues were found.

• The working element’s handle, trigger, and movable spring mechanism appear to be intact.
• The valves, fluid inlet/outlet ports, and other connection points on the sheaths are complete and undamaged.
• The joint points where the parts interlock or attach are functional and problem-free.

Accessories and Connection Ports

No additional accessories (such as cables, bags, user manuals, etc.) are present in the images apart from the main components of the set. On the sheaths, there are various valved connection ports used for irrigation (fluid delivery) and aspiration (fluid suction) procedures. All these ports appear to be intact and complete.

Label and Code Information

Some identifying information is present on one of the parts. The legible information is listed below:

• Brand: Karl Storz
• Place of Manufacture: Germany
• REF Code (Partial): A code starting with “27…” is present on one of the sheaths, but the rest of the code cannot be clearly read.

No other serial number or lot number was found in the images.

Potential Failure Risk

Based on the current condition in the images, no significant signs of wear, corrosion, or damage are observed on the products. The current condition and well-maintained appearance of the instruments indicate that they do not pose a potential failure risk if used and stored correctly. The intact appearance of the mechanical components suggests that the product is in good functional condition.