Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 22.09.2026
Report code: 1790081310
MEGA-TERM E420 P Drying Oven Analysis Report
Device Identification and Basic Information
The examined product is a dry air oven designed to perform sterilization and drying processes in medical and laboratory environments. Based on the documents located on the front panel and inside the device, it has been determined that the brand is MEGA-TERM and the model code is E420 P. The phrases DRY AIR STERILIZER LABORATORY OVEN are present on the front surface of the product.
Brand, Model, and Authenticity Assessment
Upon examination of the brand inscriptions on the front panel, model code labels, keypad layout, and the details of the warranty certificate inside, it is observed that the product is authentic. The logos and type labels comply with original manufacturing standards.
Usage Areas and Compatibility
This device is used for the dry air sterilization and drying of laboratory equipment, surgical instruments, and glassware. It is suitable for use in healthcare centers, dental clinics, and biomedical laboratories.
Quantity Information
The total product inventory in the image consists of one main oven body, two perforated metal shelves located inside, one metal shelf support rod, and one warranty certificate.
General Status and Condition
The device is in a used condition regarding its outer casing. There is slight dust and staining on the metal outer surface. The front control panel and control knobs are physically in place.
Physical Deformation
There are surface stains and slight discoloration on the outer metal body of the device. Signs of use have been observed around the door hinge and on the front panel paint.
Mechanical Components
The opening/closing handle and locking mechanism on the front door are in place. The side rails where the shelves are positioned inside and the perforated shelves are mechanically sound.
Electronic Components
The front panel contains the digital display belonging to the electronic control board, mode selection keys, increase and decrease buttons, and the power switch. The power button is located at the bottom.
Accessories
There are two perforated metal shelves in the inner chamber of the device and one metal rod used to fix or support these shelves. No extra cable or external adapter is visible in the image.
Battery Status
The device does not contain an internal or external battery; it operates directly via mains electricity.
Label and Inscription Inventory
The inscriptions and label information on the front panel are as follows: The MEGA-TERM brand is in the upper left corner, the ETİV screen frame is below it, and the expressions Mode, Heater ON, +, –, Okey Select, Rew are located above the control keys. In the lower left section, the model code E420 P is present, with DRY AIR STERILIZER LABORATORY OVEN and FUSE written below it. Around the temperature adjustment dial, there are 100, 150, 200, 250, 300 degree symbols and the phrase Safety thermostat. At the very bottom, there is a fuse slot and a red power switch labeled ON, OFF, and POWER. On the warranty certificate inside, there is a GARANTİ BELGESİ (Warranty Certificate) heading, MEGA-TERM STERİLİZATÖR VE KLİNİK DOLABI İMALATI (MEGA-TERM STERILIZER AND CLINICAL CABINET MANUFACTURING), address and contact information, as well as E-420-P ETÜV as the model, 8202522060 as the serial number, and start date information. These inscriptions allow for the verification of the device’s serial number, manufacturer information, and legal warranty status.
Display Analysis
The digital display module located in the upper left part of the front panel is off or does not show data at the time of the visual capture.
Dimensions and Compatibility
Numerical measurement information regarding the dimensions of the device is not available in the image. It is in the dimensions of a laboratory-type oven suitable for desktop use.
Production Year
There are periodic traces on the warranty certificate inside in the start date field along with the serial number 8202522060, and the handwriting format on the document and the device design lines indicate a production period from past years.
Documents
There is one GARANTİ BELGESİ (Warranty Certificate) inside a transparent bag in the inner chamber of the device. This document provides the buyer with the opportunity to prove the manufacturer and the original serial number of the device.
Usage Duration
There is no digital counter data in the image showing the total operating hours or past usage duration of the device.
Existing Fault
There is no broken part or clear error message on the body of the device in the images; however, there are general signs of use.
Potential Fault Risk
Except for the stains on the outer metal surface of the device, no serious rusting or cable crushing has been observed. The condition is generally at a medium level.
