Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 12.03.2026
Report code: 1773297864
Medtronic MiniMed Insulin Pump Analysis Report
Device Identification and Applications
The product shown in the images is an insulin pump used in diabetes management. From the label information on the device’s rear surface, it is understood that it was manufactured for diabetes treatment and supports the mmol/L standard, which is a blood glucose measurement unit. The product is a portable medical device designed for patients to adjust and administer their daily insulin doses.
Brand and Authenticity Assessment
The Medtronic MiniMed brand is clearly legible on the label located on the device’s rear surface. Details such as the print quality on the label, symbols indicating international standards, the CE certification number, and the Data Matrix code indicate that the product is an original Medtronic device. Since a specific model number (e.g., 780G, 640G, etc.) is not clearly visible in the images, model identification could not be performed.
Quantity Information
In the images, 1 main insulin pump device and 1 black silicone protective case compatible with the device have been identified. The total number of parts is two.
General Condition
The device is in used condition, but its overall condition is quite good. No severe damage, cracks, or missing parts that would hinder use have been observed on the device’s casing or screen. The accompanying silicone case also retains its form.
Physical Deformation and Mechanical Components
There are no deep scratches, cracks, or dents on the device’s black plastic body. The directional buttons (up, down, right, left), the central confirmation button, and two side menu buttons on the front surface appear physically intact. The white icons on the buttons are not faded and are clearly legible. The cylindrical protrusion (battery or reservoir compartment cover) located at the bottom corner of the device is undamaged. No tears or wear have been detected on the black silicone case.
Screen Analysis
A rectangular screen is present on the device’s front surface. The screen is in the off position, so interface or menu analysis cannot be performed. While light reflections and slight fingerprint/smudge marks are visible on the screen surface, there are no cracks or deep scratches on the glass.
Label and Technical Information
The following technical information and codes have been identified on the label located on the device’s rear surface:
- Manufacturer Medtronic MiniMed Northridge, CA 91325 USA
- Website www.medtronicdiabetes.com
- Contact (+1)818-576-5555
- Measurement Unit mmol/L
- CE Mark CE0459
- RF Code M994838A001
- IC Code 3408B-BLEPUMP
- Other Code M036970C004_1
- Protection Class IPX8 (Indication of water resistance under specific conditions)
Symbols and Warnings
Various medical and safety symbols are present on the label. These include MD (Medical Device), the symbol with MR crossed out (Not safe in Magnetic Resonance environment), a warning triangle indicating that the user manual should be read, the crossed-out wheeled bin symbol indicating that it should not be disposed of as waste, and the Type BF (body-contacting part) symbol.
Potential Malfunction Risk
During the examination conducted through the images, no structural integrity defects were detected on the device’s casing, keypad, or screen. The device is in good condition and does not pose any externally observable malfunction risk or physical hazard.
