Secondhand Airox Supportair Mechanical Ventilator

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 10.11.2025

Airox Supportair Ventilator Analysis Report

Product Description and Intended Use

The product in the image is a mechanical ventilator, a respiratory support device. Such devices are used in hospital units such as intensive care, pulmonary diseases, and emergency services to provide artificial respiratory support to patients experiencing respiratory distress or unable to breathe on their own. The “SUPPORTAIR” and “AIROX” brands on the device indicate that it is professional medical equipment. It is stated to be suitable for use by both adult and pediatric patients weighing over 5 kg. The device can be used for invasive (via tube) and non-invasive (via mask) ventilation.

Brand and Model Information

As a result of detailed examination of the images, the brand and model of the device have been clearly identified. The front panel of the device features the words SUPPORTAIR in large letters and AIROX in the bottom right corner. Based on this information, the device’s brand is Airox, and its model is Supportair.

• Brand: Airox
• Model: Supportair

General Condition and State

Based on the evidence in the image, the device appears used but in good condition. The blue light next to the power button and the active screen indicate that the device is operational. The device casing is generally clean and shows no significant signs of deformation. This suggests that the device has been carefully used and may have undergone regular maintenance.

Physical and Mechanical Assessment

The outer casing of the device is made of blue and gray plastic. No cracks, breaks, or deep scratches were detected on the casing during the examination. There might be minor superficial wear from normal use, but these are not clearly discernible from the image. All physical control buttons, such as power, confirm, settings, and alarm mute buttons, appear to be in place and intact. The handgrips on the front panel are also undamaged. No visible problems were found in any mechanical components.

Electronic Components and Indicators

The functional state of the device’s electronic components is evident from its active screen and LED lights on the panel. The front panel features various illuminated indicators for different statuses.

• Power Light: The blue light on the power button indicates that the device is on.
• Status Lights: Green lights are illuminated to the left of the screen, indicating mains connection, internal, and external battery status. This shows that the device is connected to power and its battery is either full or charging.
• Alarm Lights: Two flashing orange lights are present on the right side of the screen. These lights typically indicate a warning or alarm condition. However, the absence of a critical error message on the screen suggests this might be an informative alert, such as an exceeded set limit.

Screen Analysis

The device’s color LCD screen is active and fully functional. No scratches, pixel defects, or darkening are visible on the screen. The information displayed on the screen indicates that the device is operating in “SIMV” (Synchronized Intermittent Mandatory Ventilation) mode. Some medical parameters displayed on the screen include:

• Vt: 339 ml (Tidal Volume)
• Ppeak: 17 mbar (Peak Pressure)
• Total Rate: 14 /min (Total Respiratory Rate)
• I:E: 1:2.8 (Inspiratory/Expiratory Ratio)
• P Trig: 2 l/min (Flow Trigger)
• Back-up Rate: 10 bpm (Backup Respiratory Rate)
• Apnea: 11 s (Apnea Time)
• SpO2: 58% (Oxygen Saturation – Displays a low value, likely due to an unconnected sensor.)

Additionally, the right side of the screen features adjustable parameter menus such as “PAP”, “Rate”, and “I:E”, as well as a virtual “MUTE ALARMS” button to silence alarms.

Quantity and Accessory Status

Only 1 unit of the Airox Supportair ventilator is visible in the images. Accessories necessary for the device’s operation, such as the patient circuit (hoses), mask, oxygen sensor (SpO2 probe), and power cable, are not present in the images. The device is shown without accessories.

Potential Failure Risk and Conclusion

There is no direct evidence in the images to suggest the device is faulty. The device casing is intact, its screen is operational, and it does not display any error messages. The flashing orange alarm lights might be due to a simple reason, such as unconnected sensors or patient circuit. As no signs of severe wear or damage are observed, the potential risk of failure for the device, given its current condition, is low. Overall, it can be said that the device appears well-maintained and ready for use.