Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 04.12.2025
OxiVent OxiHome Portable Mechanical Ventilator Analysis Report
Device Identification and Areas of Use
The product examined in the images is a portable mechanical ventilator device designed for patients requiring respiratory support. It is a medical device used to provide invasive or non-invasive respiratory support in home care services or hospital environments. The device mechanically assists the patient’s breathing and can integrate with oxygen support through its input ports.
Brand and Model Information
As a result of detailed visual inspection, the brand and model information of the product has been definitively identified from the logo located on the front upper left corner of the device, the label on the left side handle, and the technical label on the rear surface.
- Brand: OxiVent
- Model: OxiHome
- Manufacturer: Modül Grup Mühendislik Elektronik Medikal (Address indicated on the label: Ankara, Turkey)
Authenticity Status
Upon examining the product’s general casing, membrane keypad structure, screen placement, detailed manufacturer label on the back, the phrase “Made in Turkey,” and barcode system, the product is assessed to be an Original OxiVent device. No signs of poor quality indicative of aftermarket or counterfeit production have been observed.
Quantity Information
A total of 1 set of products is seen in the images. The contents of the set, according to visual evidence, are as follows:
- 1 OxiVent OxiHome Main Unit
- 1 Power Adapter (with cables)
- 1 Expiration Valve Block (Transparent plastic part)
- 1 Carrying Bag (Device placed inside)
General Condition and Cosmetic Inspection
The general condition of the device is visually good and clean. It appears to be second-hand but well-maintained or lightly used.
- Physical Deformation: No noticeable breaks, deep cracks, heavy dents, or discoloration (yellowing) have been detected on the device’s white outer casing. Corners and edges appear intact.
- Cleanliness: The casing is generally clean, but minor dust accumulation that may require detailed cleaning could be present.
Mechanical and Electronic Component Analysis
Based on visual inspection, the mechanical and electronic status is as follows:
- Screen: The device features a large LCD screen on its front. Although it is not possible to determine if there are pixel errors since the device is off, no deep scratches or cracks are visible on the screen glass (or protective plastic).
- Control Panel: The membrane buttons on the front panel (On/Off, Lock, Alarm Mute, etc.) appear intact. The symbols on the buttons are not worn off. The white rotary adjustment knob (encoder knob) on the bottom right is in place.
- Connection Ports (Side Panel): All socket inputs on the side of the device are clean. The “FLOW SENSOR” input (blue), O2 input port (with white cap/metal tip), and the expiration valve housing appear mechanically sound. There is no sign of rust in the oxygen input.
Condition of Accessories
The accessories displayed with the device have been examined in detail:
- Power Adapter: A black, large-type adapter is present. The output end has a red/grey, medical-type locking (Lemo-like) connector. No peeling or breakage is visible on the cable sheaths.
- Expiration Valve (Flow Sensor Block): One of the images shows a valve group with a transparent plastic body and a green silicone membrane/part inside. The joint areas of the plastic part are intact; there are no cracks. The transparent air hose on it shows signs of yellowing, indicating this part might need replacement for hygienic reasons as it is a consumable.
- Carrying Bag: A grey-colored bag with blue piping, containing protective foam, is present, believed to be original as the device fits perfectly inside.
Technical Information and Label Data
The technical data and identification information read from the label on the back of the device are as follows:
- Serial Number (SN): 140520/K006-000144 (Code located under the barcode)
- REF Code: OxiHome
- Manufacturing Date: 2020 (Date next to the factory symbol on the label)
- Input Power: 12VDC 5A
- Website: www.modulmuhendislik.com.tr
Battery Status
The device’s rear label indicates an internal battery feature. Visually, the physical condition of the battery (e.g., swelling) cannot be determined externally, but the label includes the following specification:
- Battery Type and Capacity: 12V – 6500 mA Li-ion Battery
Current Faults and Potential Risk Analysis
There is no physical evidence (red light warning, broken part, error screen) in the images indicating the device is “Faulty.” However, the following points should be considered:
- Since the device was manufactured in 2020, the internal Li-ion battery’s lifespan may have suffered performance degradation; however, no visual deformation of the battery (such as bulging in the rear cover) has been detected.
- The slight discoloration of the hose on the transparent plastic valve part is due to use.
- In terms of its general appearance, the cosmetic and physical condition of the device does not pose a significant risk that would hinder its operation.
Usage Duration and Warranty Information
Since the screen is off, information regarding total operating hours (ventilation hours) could not be accessed. Due to its manufacturing date of 2020, it is highly probable that the device’s original warranty period has expired. No invoice or warranty certificate is present in the images.
Summary
The examined OxiVent OxiHome ventilator is visually complete, clean, and free of physical damage. Its original adapter and carrying bag are present. It was manufactured in Turkey in 2020. The side panel, keypad, and screen appear intact. Although the technical functionality and battery performance of the device can only be verified through technical service tests, its external appearance gives the impression of a well-preserved product.
