Secondhand Philips Respironics Trilogy 100 Home Mechanical Ventilator

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 11.03.2026

Philips Respironics Trilogy 100 Mechanical Ventilator Analysis Report

Device Identification and Brand Model

The product in the image is a mechanical ventilator device used to provide respiratory support. According to the inscriptions on the device’s front panel, its brand is Philips Respironics, and its model is clearly identified as Trilogy 100.

General Condition and Physical State

The device’s outer casing is made of blue and white hard plastic material. There is an integrated carrying handle on its upper part. No visible cracks, breaks, dents, deep scratches, or discoloration were detected on the casing. The device is generally clean and physically well-maintained. On the screen, there is a transparent protective tape or film, which appears to have been applied later, slightly lifted at its corners and edges.

Screen and Interface Analysis

The device’s color LCD screen is active and operational. The data and warnings displayed on the screen are as follows:

• Mode: Passive 1: PC-SIMV
• Date and Time: 12/24/2023 09:34 PM
• Measurement Parameters: RR (Respiratory Rate) 8 BPM, PIP is read as 0.0 cmH2O. Vte, Peak Flow, Leak, and MinVent values are indicated by a dash (—) sign, signifying no measurement.
• Alarms and Messages: At the bottom of the screen, highlighted with a red background, are the Low Inspiratory Pressure and Low Expiratory Pressure warnings.
• Menu Options: On the bottom row of the screen, there are Reset and Change options in the form of blue buttons.

Mechanical and Electronic Components

Immediately below the screen, there are three physical control buttons (left selection, right selection, and an up/down directional button in the middle). In the right-middle section of the device, there is a power button, and above this button, a red-illuminated alarm mute/notification light with an ‘X’ symbol is present. Below the power button, a green LED indicator light is on, showing that the device is connected to power. No physical deformation is observed on the buttons or the panel.

Accessories and Connections

A black power cable is seen connected to the lower right part of the device. In the background, a corrugated breathing circuit (hose), presumed to belong to the device, is visible within transparent packaging. The packaging appears to be sealed. Due to the visual angle, there is no information available regarding the device’s other ports, filter inlets, or battery status.

Current Status and Fault Analysis

The device is physically intact and powers on electronically without issues. The low pressure alarms seen on the screen and the PIP value read as zero (0.0) indicate that the device is operational but not currently connected to a patient or a test lung. Based on visual evidence, no hardware malfunction or potential risk has been observed in the device’s casing, screen, or keypad. The device’s condition is good.

Areas of Use

This device is a life support unit suitable for use in hospitals, intensive care units, clinics, and home care settings to support the respiration of adult or pediatric patients suffering from respiratory failure.