Secondhand Philips MRI Coil

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 12.08.2025

Philips Medical Imaging Coil Analysis Report

Overview and Product Description

In the images, there are two medical imaging device accessories belonging to the Philips brand. As can be understood from their “Philips Medical Systems” labeled boxes, these products are likely surface coils used in Magnetic Resonance (MR) imaging systems. Each coil is located in its own cardboard box.

The products are sensitive medical accessories designed to receive signals from a specific region of the body during diagnostic imaging procedures. According to the labels in the images, two different types of products are available.

• Quantity: 2 units of medical imaging coils
• Brand: Philips

Physical State and Condition Assessment

The products, due to being in their original boxes and their overall clean appearance, may be unused (new old stock) or very lightly used. The original “Philips Medical Systems” branded boxes and the labels on them indicating they passed factory tests reinforce the impression that the products are original.

However, there are some notable deformations and differences in condition:

• Cable Color Difference: The cable of one of the devices is noticeably yellowed, while the other’s cable is white. This yellowing may indicate that the material has aged over time or has been exposed to different storage conditions.
• Box Deformation: Stains and color fading are visible on the top surface of one of the boxes.
• Connector Status: In one image, it is noticeable that the connector part of one of the coils has been disassembled, and the pins inside are visible. This situation could be an indicator of an inspection, a repair attempt, or an existing fault.

In general, no tears, cracks, or dirt have been observed on the padded parts of the coils.

Technical Information and Label Data

The labels on the connectors of the devices contain important technical information and serial numbers. Although both devices were manufactured on the same date, they have different types and serial numbers.

1. Device Label Information (Yellowed Cable):

• Type: 9896 030 02032
• ON: 300175930
• SN: 003356
• Production Date: MAY 2007

2. Device Label Information (White Cable):

• Type: 9896 030 05011
• ON: 300176296
• SN: 053389
• Production Date: MAY 2007

Accessories and Package Contents

Each coil is presented with a box that has cardboard supports inside to secure the product. On the boxes, there is a label indicating that the product has successfully passed factory test procedures. No user manual, additional cables, or other accessories are visible in the images.

Current Condition and Potential Risks

Based on visual evidence, the current and potential risks are summarized below:

• Evidence of Existing Fault: The fact that one unit’s connector is disassembled is clear evidence that this part may be faulty or its integrity compromised. This situation can directly affect the device’s operability.
• Potential Risk of Failure: The fact that the products were manufactured in 2007 indicates that they are technologically old and their materials (especially the cable insulation) may have deteriorated over time. The significant yellowing on one of the cables is an indicator of material aging and carries the risk of the cable losing its flexibility and becoming brittle in the future.

Apart from these factors, the padded parts of the products appear to be in good condition.