Secondhand Mach 120F Operating Light

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 21.04.2026
Report code: 1776780371

Dr. Mach Mach 120 Mobile Examination Lamp Analysis Report

Device Identification

The images show a single-head medical lighting device mounted on a wheeled stand with an adjustable arm. This device is a mobile examination lamp.

Brand and Model

The text Mach 120 is clearly visible in blue letters on the side of the lamp head. Based on this inscription, it has been determined that the brand of the device is Dr. Mach and the model is Mach 120.

Usage Areas

This mobile examination lamp is designed for use in hospital examination rooms, outpatient clinics, emergency departments, and minor surgical procedure rooms. Its primary purpose is to illuminate the physician’s workspace with high-quality, shadowless, and focused light during medical examinations, diagnostic procedures, and minor surgical operations. Due to its mobile structure, it can be easily transported between different rooms and adjusted to the desired position.

Quantity Information

There is one Dr. Mach Mach 120 mobile examination lamp in the images.

General Condition and Physical Deformation

The general condition of the device appears to be used. There are some stains and slight discoloration on the white plastic housing of the lamp head and the adjustment arm. Dust accumulation and slight signs of wear are visible on the lower parts of the metal stand and at the wheel connection points. However, no deep cracks, broken parts, or major impact marks are observed on the housing. The condition of the device is moderate.

Mechanical Components

The mechanical components of the device include the wheeled stand, vertical column, adjustable articulated arms, and the lamp head. As far as can be understood from the images, the spring mechanisms and connection points of the articulated arms maintain their integrity. The wheels are in place. The handle used to adjust the angle of the lamp head appears to be intact. No significant breakage or deformation that would hinder functionality has been detected in the mechanical parts.

Electronic Components and Accessories

The electronic components of the device include the light source inside the lamp head (likely halogen or LED), internal wiring, and the power control unit. In the images, the front glass of the lamp head appears intact. The power cable and plug of the device are wrapped around a hook on the middle part of the metal stand. No significant cuts, crushing, or damage are visible on the outer insulation of the cable. The plug is of a standard type and is intact. There is a white unit at the bottom of the device’s stand, which is likely a power supply or control box. The outer casing of this unit is intact. There is no screen or complex control panel on the device.

Label Information

No readable label containing technical information such as serial number, lot number, or REF code could be detected on the device in the images.

Manufacturing Year and Documents

There is no information regarding the manufacturing year of the device, nor are there any documents such as invoices or warranty certificates in the images.

Existing Faults and Potential Risk of Failure

There is no clear evidence (broken parts, burn marks, etc.) in the images indicating that the device is faulty. The physical condition of the device is good, apart from wear and tear due to use. Therefore, no significant risk of failure has been observed.