Secondhand Respirox SZ-T 10L/min Oxygen Concentrator

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 29.08.2025

Respirox SZ-T Oxygen Concentrator Analysis Report

Overview and Device Description

The device shown in the visuals is a Respirox brand SZ-T model oxygen concentrator that provides high-purity oxygen to its user by concentrating oxygen from the air. The “OXYGEN CONCENTRATOR” inscription, brand logo, and model code are clearly visible on the front panel of the product. The general purpose of the device is to provide oxygen therapy for individuals requiring respiratory support, either at home or in healthcare facilities. Additionally, the “Nebulizing Interface” port on it indicates that the device also has a nebulizer function.

Based on the inspections in the visuals, the quantity information of the product is stated below:

• 1 unit Respirox SZ-T Oxygen Concentrator
• 1 unit Humidifier water tank attached to the device

Brand and Model Information

• Brand: Respirox
• Model: SZ-T

General Condition and Status

The general condition of the device is quite good and can be described as “lightly used” or “like new”. No significant wear, yellowing, or discoloration has been observed on the casing. The fact that the protective film is still present on a part of the top control panel indicates that the device has been used carefully or very little. The blue light emanating from the bottom of the device shows that its electronic system is active and operational. The quality of the logo, writings, and labels supports the originality of the product.

Physical and Mechanical Analysis

No scratches, cracks, dents, or impact marks have been found on the white plastic casing of the device. The flowmeter (flow meter) located on the right side, which indicates the oxygen flow per minute (L/min), is intact and readable. All mechanical components, such as the nebulizer port, power button, and the section where the humidifier tank is placed, appear visually problem-free and complete.

Electronic Components and Accessories

On the upper part of the device, there is a digital screen and an on/off button. Although the digital screen cannot be fully read due to the protective film, it is understood to be active. The only accessory included with the device is the transparent humidifier water tank attached to the front panel. The tank appears clean and contains some liquid. An external battery is not visible in the visuals; such devices typically operate directly with electricity. The device’s power cable or other potential accessories such as cannulas and masks are not present in the visuals.

Label Information

On the front face of the device, there are informational labels introducing product features rather than technical details. The information on these labels is as follows:

• Continuous Oxygen
• 93% Purity
• Instant O2 Measurement
• Eco-Friendly

Due to the angles from which the visuals were taken, labels containing the serial number, REF code, manufacturing date, or other technical information that might be on the back or bottom of the device are not visible.

Potential Malfunction Risk

As a result of the examinations in the visuals, no findings indicating any current or potential malfunction risk in the device have been encountered. The clean and well-maintained appearance of the device, along with its problem-free physical and mechanical components, gives the impression that it operates regularly. Since no rust, cable damage, or significant wear has been observed, the current condition of the product is good.