Ready For Sale
Secondhand Respirox 7F-3 3L/min Oxygen Concentrator
Price: USD$ 130,00Approx: 5.460,00 TL
Ready For Sale
Ask a Question
Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 17.07.2025
Respirox 7F-3 Oxygen Concentrator Analysis Report
Device Description and Intended Use
The device shown in the images is an oxygen concentrator. Such devices are used to provide the user with high-concentration oxygen by separating nitrogen from the ambient air. It is particularly used for patients in need of respiratory support in home or clinical settings.
Brand and Model Information
According to the information on the device, the product’s brand is Respirox, and the model is 7F-3. The quality of the logo and lettering on the device suggests that the product is original.
Quantity Information
The images show 1 unit of the Respirox 7F-3 model oxygen concentrator. It has been observed that a basic accessory, such as the humidifier water bottle, is missing.
General State and Condition
The overall condition of the device is assessed as used. There is general yellowing and some dirt on its white plastic casing. This indicates that the device has been used and stored for some time. No serious damage or cracks have been observed, but signs of cosmetic wear are evident.
Physical and Mechanical Assessment
- Casing: There are no significant cracks or fractures on the device’s casing. However, minor scratches and dark marks due to friction are visible on the lower parts and corners. There are dust and dirt accumulations inside the humidifier slot on the front panel.
- Oxygen Outlet: The oxygen outlet port, labeled “OXYGEN OUTLET,” is present.
- Control Panel: The power (POWER) button, timing, and adjustment buttons are physically intact and show no signs of breakage or depression.
- Flow Meter: The flow meter and adjustment knob, located on the right side of the device, which indicate the amount of oxygen delivered per minute (L/min), appear to be intact. The ball inside the transparent tube of the flow meter is at the lowest level.
Screen Analysis
There is a digital display on the top of the device. In the image, the screen is off. From the text on the screen panel, it is understood that the device’s total operating time can be tracked as “COUNTS (hours)” and the session duration as “TIMING (minutes)”. However, these values cannot be read from the current image.
Accessories and Missing Parts
Based on the visual inspection, the device has significant missing parts:
- Humidifier Bottle: The water bottle (humidifier bottle), which humidifies the oxygen before delivery to the patient and is placed in the slot on the front of the device, is not present. This means the device is incomplete for humidified use.
- Power Cord and Other Cables: The power cord required for the device’s operation is not present in the images.
- Oxygen Cannula/Mask: Accessories such as a cannula or mask, which deliver oxygen to the patient, are also not present.
Potential Risk Assessment
The fact that the device is used and has accumulated dirt necessitates that it undergoes maintenance and hygienic cleaning by a professional technical service before use. The most significant missing part is the humidifier bottle. Without this part, the device is considered functionally incomplete, as it could cause dryness in the patient’s respiratory tract during long-term use.
These assessments are predictions based solely on visual inspection and do not imply a definitive fault in the device. It is likely that the device will be in working condition once the specified missing parts are supplied and the necessary maintenance is performed.