Secondhand Respirox Healthbox 3L/min Oxygen Concentrator

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 07.09.2025

RespiroX Health Box Oxygen Concentrator Analysis Report

Product Description and Overview

The device shown in the images is an oxygen concentrator that separates oxygen from ambient air and provides concentrated oxygen. The phrase “OXYGEN CONCENTRATOR” is present on the product. It is understood that the device is designed for use by patients requiring respiratory support in home or clinical settings. The images show one oxygen concentrator and its integrated power cable.

Brand and Model Identification

Upon detailed examination of the device’s front panel, the RespiroX brand and Health Box model name are clearly legible. This information visually verifies the product’s identity.

General Condition and Status Assessment

The general condition of the device is assessed as “used”. There is noticeable yellowing on its plastic casing, believed to be caused by age or exposure to sunlight. While this is an aesthetic flaw, it does not indicate a functional problem. No significant damage that would compromise the device’s integrity has been observed.

Physical Deformations and Cosmetic Details

Upon examination of the product’s physical condition, the following details were identified:

• Color Change: The device’s original white color appears to have yellowed.
• Scratches and Stains: There are small scratches and friction marks on the top and side edges of the device due to use.
• Surface Cleanliness: A general layer of dust and dirt is present on the device. Tape residue can be seen on the top surface.
• Cracks or Fractures: No breaks, cracks, or dents were detected on the device’s casing in the images.

Mechanical and Electronic Component Analysis

The mechanical and electronic components of the device were visually inspected:

• Control Panel: The top section features a digital screen, a power button (POWER), and “+” and “-” buttons for time adjustment. Since the screen is off, information such as whether it is operational or the total operating hours (“COUNTS (hours)”) cannot be seen.
• Flow Meter: The rotary knob for adjusting oxygen flow rate and the transparent tube showing measurements in liters per minute (L/min) appear intact. The level indicators from 0 to 5 on the gauge are legible.
• Oxygen Outlet: The oxygen output port, marked as “OXYGEN OUTLET,” is in place and shows no physical damage.
• Humidifier Reservoir: A compartment designed for a transparent humidifier water bottle is located at the front of the device. This compartment is empty.
• Accessories: Other than the black power cable attached to the device, no additional accessories (oxygen cannula, humidifier bottle, remote control, etc.) are present in the images.

Potential Malfunction Risk and Conclusion

Considering the device’s used condition and the yellowing of its outer casing, it is possible that internal filters and moving parts such as the compressor may require maintenance or replacement due to prolonged use. However, there is no direct evidence in the images (broken parts, error messages) indicating that the device is faulty. In its current state, the device’s main components appear physically sound and in place. This suggests that the device’s overall condition is reasonable for its age.