Secondhand Respirox Healthbox 3L/min Oxygen Concentrator

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 21.11.2025

RespiroX Health Box Oxygen Concentrator Detailed Analysis Report

Device Description and Brand Information

The device shown in the image is a medical-grade, wheeled, and portable oxygen concentrator. Upon examining the logos and texts on the front of the device, the following brand and model information has been identified:

• Brand: The RespiroX inscription, along with a characteristic heart rhythm (ECG) line graphic, is clearly visible on the device’s front panel, using red and black colors in the logo.
• Model: The inscription HEALTH BOX OXYGEN CONCENTRATOR, written in capital letters on the lower part of the device, identifies this device’s model series.
• Product Type: Stationary oxygen concentrator suitable for home or clinical use.

General Condition and Cosmetic State

Upon examining the product’s outer casing and visible surfaces, it is evident that the device is used. It is not a new or zero-hour product. The following cosmetic details have been identified:

• Casing Color and Cleanliness: The device’s casing is beige/cream colored. There are occasional signs of use, light dirt, and color tone variations on the surface. Specifically, below the “HEALTH BOX” inscription, near the base, there is a deformation/stain resembling the letter “A” written or marked with a black pen.
• Physical Deformation: The casing maintains its overall integrity; no deep cracks or breaks were detected in the image. However, superficial scratches due to friction may be observed on the surface.
• Middle Compartment: The compartment in the middle of the device, protected by a transparent cover, is normally where the humidifier water bottle is placed. This transparent cover is present in the image but appears slightly foggy and has lost its transparency due to use.

Technical Components and Hardware Examination

Based on the image, the device’s control panel and functional parts have been analyzed as follows:

• Control Panel: A digital LCD screen is located on the upper part of the device. Adjustment buttons (+, – and I/O) are situated to the left and right of the screen. Additionally, there is a mechanical “POWER” switch on the far right. The texts “COUNTS (hours)” and “TIMING (minutes)” are legible on the panel, indicating that the device can count total operating hours and has a timer function.
• Flow Meter (Debimeter): A vertically positioned, ball-type mechanical flow meter is located on the front right side of the device. The scaling lines are in L/min (liters per minute).
• Oxygen Outlet: The inscription “OXYGEN OUTLET” is located on a metallic output port on the left side. This is the point where the oxygen tubing is connected.
• Wheels: The presence of wheels, which provide mobility, is partially visible at the bottom of the device. While no detailed comment can be made about the condition of the wheels, the device appears to stand stably.

Accessories and Missing Parts

Based on the visual analysis, the essential accessories required for the device’s operation and any missing parts are as follows:

• Available Accessories: A dark gray electrical power cable extending from the back of the device to the floor is visible. The cable is lying loosely on the ground.
• Missing Parts: The water bottle (humidifier bottle), which should be located in the middle compartment of the device, is not present in the image. This part is typically required for humidifying oxygen and appears to be missing from this device. Furthermore, a cannula or mask for oxygen delivery to the patient is also not visible in the image.

Potential Status and Compatibility

In light of the data in the image:

• Potential Malfunction Risk: There is no rust or significant impact damage visible on the device’s exterior. However, the fact that the product is second-hand and dirty may indicate that its internal filters and compressor system might require maintenance. No crushing or breakage was detected in the visible cables.
• Quantity Information: Only 1 unit of the oxygen concentrator and its connected power cable are present in the image.
• Operating Status: At the time of the photograph, the device’s screen is off and its lights are not illuminated; therefore, it could not be determined from the image whether the device was operational at that moment.