Secondhand Hikoneb Oxybreath Mini 5 5L/min Oxygen Concentrator

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 24.07.2025

Hikoneb OxyBreath Mini 5 Oxygen Concentrator Analysis Report

Overview and Device Description

The product shown in the images is an oxygen concentrator device. The device is a medical apparatus designed to produce high-concentration oxygen by separating nitrogen from the ambient air. It is designed for use in a home or clinical setting for patients requiring respiratory support. The product in the images consists of the main unit and its attached accessories.

Brand and Model Information

The brand and model of the device are clearly indicated on its rear label and front panel. While the Kare Medical and hikoneb logos are present together on the front panel, the hikoneb brand is prominent as the manufacturer on the rear label.

• Brand: hikoneb
• Model: OxyBreath Mini 5

The overall workmanship of the product, the quality of the logo printing, and the label information suggest that the device is genuine.

Physical State and Condition

The overall condition of the device is very good, giving the impression of a lightly used or new product. No significant scratches, cracks, dents, or discoloration have been observed on the casing. The device’s white plastic casing is clean and spotless. There may be minimal dust on its outer surface and wheels, but it has a generally well-maintained appearance.

Mechanical and Electronic Components

No issues have been visually detected in the mechanical and electronic components of the device.

• Wheels: The four wheels located underneath the device appear sturdy and clean.
• Carrying Handle: The integrated carrying handle on the top is solid.
• Buttons and Controls: The control buttons on the front panel and the power switch on the top are in good physical condition. The flowmeter, which adjusts the flow rate, is intact and its gauge is clear.
• Filter Cover: The filter cover on the rear is in place and shows no signs of damage.
• Screen: As the device was not operational, the functionality of the screen could not be tested; however, it is physically intact and clean.

Accessories and Connection Ports

The following accessories and connection ports are visible with the device in the images:

• Humidifier Bottle: A water and humidifier bottle is attached to the front section of the device. The inside of the bottle appears clean.
• Oxygen Cannula: A transparent tube (cannula) is attached to the device’s oxygen outlet.
• Power Cord Inlet: There is a standard 3-pin power cord inlet at the lower rear of the device. The power cord itself is not present in the images.

Technical Label Information

Detailed technical information is found on the manufacturer’s label located on the back of the device. According to this information, the device was manufactured in Turkey and the year of production is 2023.

• Product Name: Oksijen Konsantratörü / Oxygen Concentrator
• Model: OxyBreath Mini 5
• Power: 330W
• Voltage: 230V 50Hz 1.5A
• Class: II
• O2 Flow Rate: 0.5-5 Lpm (Liters/minute)
• Outlet Pressure: 7-10 psi
• O2 Ratio: 90%±3 @ 2Lpm
• Serial No.: BE23-AA00889
• Place of Production: Türk Malı / Made in Turkey
• CE Mark and Code: CE 1984, 2023
• IP Protection Class: IP21

Potential Risk Assessment

Based on visual inspection, the physical condition of the device is near-perfect. No conditions that could indicate a potential malfunction, such as any rust, crushed cables, severe wear on the casing, or cracks, have been observed. The fact that the device is well-maintained and clean gives the impression that it has been regularly inspected. These observations indicate that the risk of the device malfunctioning in the near future is low. However, it should be noted that this comment is only a preliminary visual assessment, and the full functionality of the device’s electronic components must be tested by a specialist.