Secondhand BMC Resmart G1 30T BPAP Device with Humidifier

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 25.02.2026

PlusMED RESmart BPAP Respiratory Device Analysis Report

Device Identification

The device in the examined visuals is a PAP (Positive Airway Pressure) device with an integrated humidifier unit, used in the treatment of respiratory failure and sleep apnea. The product consists of a combined structure, including the main control unit and a water chamber (humidifier) attached to the front. A carrying bag and a power cable are also present.

Brand and Model

Based on examinations of the device’s front control panel and the top part of the screen, the brand and model information is as follows:

• Brand: PlusMED (Logo located on the device)
• Model Series: RESmart BPAP (The inscription “RESmart BPAP” is clearly visible on the upper part of the screen)

The device, in terms of its visual design and casing structure, is a version of the BMC-produced RESmart series distributed under the PlusMED brand.

Authenticity

Upon examining the product’s plastic case quality, button layout, screen placement, and label prints, it is observed to be manufactured to industrial standards. No molding errors or irregular labeling are visible, and the device appears to be an original OEM-manufactured medical device.

Areas of Use

This device is designed for home treatment of patients experiencing respiratory failure such as obstructive sleep apnea (OSAS) or COPD. Thanks to its BPAP (Bi-level Positive Airway Pressure) feature, it applies two different pressure levels to the patient during inhalation and exhalation. It is used in the fields of pneumology and sleep medicine.

Quantity Information

The total number of parts identified in the visuals is 3:

• 1 BPAP main device unit (with water chamber attached)
• 1 Power cable
• 1 Original carrying bag

General Condition

The device is second-hand and in used condition. There are superficial marks on its exterior due to use, but its overall condition appears clean and intact. It has been observed that the device is not idle or scrap, but rather actively used and subsequently stored.

Physical Deformations

No deep cracks, breaks, or fragmentation have been detected on the dark gray plastic casing. While some dulling and water marks are visible on the transparent plastic part of the water chamber due to use, no structural cracks are noticeable. There are no openings at the case’s joints.

Mechanical Components

The carrying handle located on the upper part of the device appears sturdy. The locking mechanism of the humidifier water chamber to the device is in the closed position, with no openings. The gray rubber stopper on the chamber is in place. No mechanical deformation has been observed at the air outlet port.

Electronic Components

The button array (6 buttons) on the device’s control panel is physically sound; no depressions or wear are apparent on the buttons. The LCD screen is off in the visual, thus pixel errors or backlight status could not be analyzed. Only visual physical integrity is present.

Accessories

Accompanying the device is a black, zippered, specially padded carrying bag. The bag is generally clean. Additionally, a black, standard AC power cable (the plug appears to comply with European standards) is present. The device tubing (circuit) and mask are not present in the visuals; these parts are missing.

Battery Status

RESmart series devices typically operate with mains electricity. No external battery pack or battery module is visible in the visuals.

Label Information

Since the device’s technical label (rear or bottom surface) is not displayed in the visuals, the serial number, lot number, REF code, and electrical voltage values (Input V/A) cannot be read. Only the model and brand inscriptions on the front panel can be confirmed.

Screen Analysis

A rectangular monochrome LCD panel is located on the device’s top surface. Since the device is not connected to power, no menu, alerts, or operating hour information can be displayed on the screen.

Size and Compatibility

The device is compact, with dimensions suitable for desktop use (“bedside table” dimensions). It is designed for adult use. The air outlet port on the water chamber is compatible with standard 22mm diameter hoses.

Year of Manufacture

No date-containing label is visible on the device in the visuals. Based on its design language and model history, it can be said to be a modern production (close to current casing), but a definitive year cannot be determined.

Documents

No user manual, warranty certificate, service form, or invoice belonging to the device is present in the visuals.

Usage Duration

Since the device screen is off, information on total operating hours (Total blower hours) could not be accessed.

Current Malfunction

During the visual inspection, no broken parts, burn marks, or damage resulting from impact indicating the device is “faulty” were detected.

Potential Malfunction Risk

There is a risk of calcification inside the water chamber and a risk of the chamber seals (black o-rings and gray stopper) losing their sealing properties over time. These parts are consumables. Additionally, the condition of the device’s air intake filters (usually located at the rear) should be checked as they are not visible in the visuals, and replaced if necessary.