Secondhand BMC G2S B30T BPAP ST Device with Humidifier

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 02.03.2026

BMC RESmart GII Series PAP Device Analysis Report

Device Identification

The product examined in the visuals is a positive airway pressure (PAP) device used for respiratory therapy. The device consists of a main body integrated with a heated humidifier unit.

Brand and Model

Brand: BMC
Series/Model: The “BMC” logo is clearly visible in the upper left corner of the device. Considering the front panel design, the screen’s position, the placement of the control knob, the alarm mute button on the left side, the ramp button on the right side, and the transparent humidifier chamber integrated into the right side, it has been determined through visual design identification that the device belongs to the BMC RESmart GII series (e.g., a series including models like Y-30T or E-20A). The full model code (E-20A, Y-25T, etc.) is not legible on the visual.

Authenticity

Upon examining the printing quality of the brand logo on the product, the craftsmanship of the keypad, the compatibility of the humidifier chamber with the device body, and the texture of the materials used (plastic injection quality), the product is assessed to be an original BMC production.

Areas of Use

This device is used to provide continuous or variable positive airway pressure to patients in conditions such as Obstructive Sleep Apnea (OSA) or respiratory failure. It is suitable for home care services and clinical environments. The humidifier unit is used to prevent the patient’s airway from drying out.

Quantity Information

The parts identified in the visual are as follows:

• 1 Main Device (Humidifier included)
• 1 AC/DC Power Adapter
• 1 Breathing Hose (Tube)
• 1 Mask Headgear (Head Strap)

General Condition

The device is in used condition (second-hand). It is not a new or packaged product. The overall body integrity of the device is maintained.

Physical Deformations

No deep cracks, fractures, or dents have been detected on the outer casing of the device. However, there are noticeable dust accumulations on the black screen panel and around the knob. While it is not clearly discernible whether there are fine hairline scratches on the screen surface due to light reflection, the panel surface was observed to be dirty. Yellowing (UV effect) on the plastic body is not prominent.

Mechanical Components

The rotary control knob and two push buttons on the front of the device are in place. The humidifier chamber appears to be fully seated in its slot. There are no visible breaks in the chamber lock or its outer plastic. The air outlet port is intact.

Electronic Components

Only the external appearance of the device was analyzed in the visual. The screen is off, and there is no data regarding pixel errors or backlight status. The device appears to be plugged in (adapter cable connected), but the operating light is not active in the visual.

Accessories

• Hose: A standard grey spiral (corrugated) breathing hose is attached to the device. No bends or external deformations are observed on the hose.
• Adapter: A black power adapter is present. The label integrity is complete.
• Headgear: A grey, presumably velcro-equipped mask head strap is next to the hoses. Only the strap is visible; the mask itself (silicone/face piece) cannot be clearly discerned.

Battery Status

The device operates with an external adapter. There is no visual indication (battery cover or battery symbol) of an internal battery. It is not portable; it is a model dependent on mains electricity.

Label Information

The label information on the power adapter is as follows:

• Model: MDA60-220S24 (Standard adapter code compatible with BMC devices)
• Number Below Barcode: 25300108550
• Type: AC/DC Adapter

Screen Analysis

The screen is off. No analysis could be performed. Reflections of ambient objects (ceiling, furniture) and dust particles are visible on the glossy black surface of the screen panel.

Dimensions and Compatibility

It is of standard desktop dimensions designed for adult use (Approximate size class: Bedside table type home device).

Year of Manufacture

A label indicating the manufacturing date on the device is not at a legible angle in the visual.

Operating Hours

To access the total operating hours (Total blower hours) information of the device, it is necessary to enter the device menu. This information cannot be obtained from the visual.

Documents

No warranty certificate, invoice, user manual, or service form is present in the visuals.

Current Malfunction

No malfunction that disrupts physical integrity (breakage, disconnected cable, burn mark) has been detected in the visual inspection.

Potential Malfunction Risk

The heavy dust on the device indicates that the air intake filters may also be clogged. Clogged filters can lead to motor overheating. Apart from this, due to no tears being observed in the hose and plastic components, its condition is at a medium-good level.