Secondhand Antano ULISSE EL Patient Lift

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 30.01.2026

ANTANO 150 Kg Capacity Patient Transfer Lift Analysis Report

Device Identification

The device shown in the visuals is a motorized patient transfer lift (patient hoist) system that enables the safe transfer of patients with limited mobility from beds, wheelchairs, or the floor. The product consists of a wheeled chassis, main mast, lifting arm (boom), electric actuator, control box (battery unit), and hand control.

Brand and Model Information

The following identifications have been made by examining the inscriptions and characteristic features on the device. As mechanical and electronic components in patient transfer lifts may belong to different manufacturers, components have been analyzed separately as per special instruction:

• Patient Transfer Lift Brand-Model: The brand ANTANO is identified, written in blue letters on the vertical mast of the device. Although the model name cannot be clearly read from the label, the inscription MAX WEIGHT KG 150 appears in capital letters on the lifting arm. This indicates that the device is an Antano brand model with a 150 kg lifting capacity.
• Battery Brand-Model: A cream-colored control box with an emergency stop button is present on the device. Although a logo is visible on the front face of the box, the visual clarity is not sufficient to read the brand name with 100% certainty. Therefore, no assumptions have been made.
• Motor Brand-Model: The piston (actuator) performing the main lifting operation is located behind the mast, but no label indicating a brand or model is visible from the visual angle.
• Remote Control Brand-Model: A standard two-button (up/down) wired hand control is present for the device. The manufacturer’s brand cannot be distinguished on the remote control.

Areas of Use

This device is used for transferring physically disabled, elderly, or completely immobile patients with the assistance of a caregiver. It is suitable for use in home care services, hospitals, nursing homes, and physical therapy centers. It is designed to ensure patient and caregiver safety during bed, wheelchair, or toilet transfers.

Originality Status

The overall structure of the device, the factory-like appearance of the “Antano” brand print, the placement of safety labels, and the compatibility of the equipment used indicate that the product is an original industrial production. It does not give the impression of being handmade or assembled later.

Quantity Information

The visual shows a total of 1 unit of an integrated patient transfer lift. The device includes 1 hand control and a control unit.

General Condition and Cosmetic Inspection

The product is in used condition. Detailed observations regarding the general condition of the device are as follows:

• Physical Deformations: Superficial scratches and stains due to use are visible on the metal body and lifting arm. Friction marks are particularly present at metal connection points and on painted surfaces. However, no major dents, cracks, or fractures that would impair the body’s integrity have been detected.
• Mechanical Components: The wheels are in place. Brake mechanisms are visible on the rear wheels. A foot pedal mechanism for opening and closing the chassis legs is present. The patient transfer sling attachment (spreader bar) and its hooks appear sturdy.
• Plastic Components: No yellowing or significant fractures are visible on the motor and battery covers. However, the color of the plastic surfaces may indicate slight tonal differences that can occur over time.

Electronic Components and Battery Status

The electronic unit of the device is mounted on the mast. It is not possible to perform technical measurements regarding the battery unit’s condition from the visual. However, no obvious deformation such as swelling or acid leakage is observed on the battery box in the visual. A red “Emergency Stop” button is present on the control box. The hand control is connected to the unit via a coiled cable, and no breaks or pinches are visible in the cable.

Accessories and Missing Parts

• Included Accessories: Wired hand control, control unit (brain/battery box), 4-hook spreader bar.
• Missing Accessories: The fabric transfer sling (sling/harness), which needs to be attached to the spreader bar for patient transfer, is not present in the visuals. The buyer will need to procure this part separately.
• Charger: An external charging cable is not visible in the visual. (Note: In some models, the charging cable may be integrated, or an external adapter might be required; this detail is not present in the visual).

Label Information

The label details identified on the device are as follows:

• Load Capacity: “MAX WEIGHT KG 150” is written in large black font on the upper lifting arm.
• Brand Inscription: The inscription “ANTANO…” is present in blue vertical text on the vertical mast.
• Warning Labels: Yellow labels, likely containing usage and safety warnings, are present on the control box, but the fine print on them is unreadable.
• Product Label: A white technical label (specification label) is visible near the right leg connection point of the lower chassis. This label likely contains the serial number, year of manufacture, and CE markings, but these data cannot be read due to the photographic distance.

Dimensions and Compatibility

The product is sized for standard adult transfer (150 kg capacity supports this). The low-profile chassis structure is designed to fit under chairs and beds.

Potential Failure Risk

No critical damage (broken piston, severed cable, bent chassis, etc.) that would impede the device’s operation is visible in the visuals. Its condition appears reasonable for its age. However, as it is a second-hand product, the battery life may need to be checked. Wear and tear on the metal components appears only cosmetic and does not give the impression of posing a structural risk. The most significant missing item is the transfer sling, which is essential for use.