Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 10.11.2025
Liko Patient Hoist Analysis Report
Product Description and Content
The images show a wheeled patient hoist used for the safe transfer of individuals with restricted mobility, and a patient bed located behind the hoist. The analysis focuses on the patient hoist in the foreground and its accessories. The products have been evaluated as a whole, and all elements present in the visual have been examined.
- Quantity Information: The images show a total of 1 patient hoist, 1 transfer sling, 1 wired hand control, and 1 patient bed in the background.
- Area of Use: The device is designed to facilitate operations such as transferring a patient from a bed, to a wheelchair, or another surface. The bed in the background is a ripple air mattress, used to prevent pressure sores in bedridden patients.
Brand and Model Information
This report addresses the brand information of the relevant parts separately, as the product is a patient hoist. The evaluation is based solely on clear and readable information in the images.
- Patient Hoist Brand-Model: It is clearly understood from the logo on the main body of the device that its brand is Liko. Additionally, on the lifting arm, there is the word COMFORT in capital letters and lift in smaller type.
- Battery Brand-Model: The battery is integrated into the main control unit, and no information about its brand or model could be identified from the images.
- Motor Brand-Model: The labels on the motor (actuator) that performs the lifting operation are not legible, so brand and model information could not be determined.
- Control Brand-Model: No brand or model text is visible on the wired hand control.
- Patient Bed Information: On the side of the patient bed in the background, there is blue text that reads “For Health”.
General Condition and Status
The patient hoist generally appears clean, well-maintained, and lightly used. The brand logo, text, and overall workmanship quality on the device suggest that the product is original. The paint and plastic coatings on the metal components are in good condition, and the overall condition of the device is observed to be high.
Detailed Physical and Mechanical Analysis
Upon detailed examination of the product’s physical and mechanical components, no serious defects were detected. The general condition of the parts is as follows:
- Body and Chassis: No significant scratches, dents, or rust are observed on the device’s white metal body and chassis. There might be minor friction marks due to use on the bottom part where the wheels are located, but these details are not clear in the images.
- Mechanical Components: The wheels and braking systems (red pedals) appear sturdy. No visible problems are found in the leg spreading mechanism of the device or the movable joints of the lifting arm. The red emergency stop button and other control buttons are in place and physically sound.
- Accessories: The blue and yellow transfer sling attached to the hoist is clean and has no tears or rips. The coiled cable of the wired hand control maintains its flexibility, and no breaks or pinches are observed on it.
Electronic Components and Battery
The electronic components of the device appear to be in good order, as far as visible from the outside. The plastic casing on the main control unit is intact and has no cracks. No swelling, leakage, or any deformation has been detected in the battery compartment. Since the charging cable or adapter is not present in the images, no comments can be made about these parts.
Label and Technical Information
The manufacturer’s label, which is likely to be on the main body of the device and contains technical details, cannot be read due to the angle and resolution in the images. Therefore, the following information could not be determined:
- Serial Number: Not readable in images.
- REF Code: Not readable in images.
- Year of Manufacture: Not specified in images.
Potential Risk Assessment
Based on visual inspections, no significant condition that could pose an immediate risk of failure has been identified on the device. There are no potential hazards such as crushed cables, rust at critical points, or cracks in the main body. The current physical condition of the device gives the impression that it can be used without problems for a long time if regularly maintained.
