Secondhand Wollex WG-L510 Patient Lift

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 25.11.2025

Visual Analysis Report of Patient Transfer Lift

Device Identification

The product displayed is a motorized (electric) patient transfer lift that enables the safe transfer of individuals with limited mobility. The device consists of a wheeled base unit, a vertical support column, a lifting arm moved by a hydraulic or electric piston, and a spreader bar where the sling attachment for holding the patient is connected.

Brand and Model

Upon examination of the visuals, the overall design structure of the product is in the form of a standard medical lift. However, labels or logos containing brand and model information are not clear enough to be read with 100% certainty in the images. Therefore, no estimated brand has been specified to avoid misleading information. The condition of the relevant parts is detailed below:

• Patient Transfer Lift Brand-Model: No distinguishing brand name could be read on the chassis or body from the visual.
• Battery/Control Unit Brand-Model: A white control box with a blue-white label is present on the device. Although the design conforms to industrial medical standards, the brand name on it cannot be clearly distinguished.
• Motor (Actuator) Brand-Model: A piston motor is mounted parallel to the vertical body. The details on its label are not legible.
• Remote Control Brand-Model: A wired hand remote control is hanging on the device, but brand information is not visible.

General Condition

The device appears to be new (unused) or newly installed. The strongest evidence supporting this is the white protective packaging materials (foam/bubble wrap) still present on the handlebars and certain parts of the device’s body. The paint on the metal components of the device is smooth and shiny; no signs of use, scratches, or dirt are visible.

Originality

The product gives the impression of an original medical device from an industrial production line. The compatibility of the parts, weld points, plastic covers, and wheel structure prove that it is not a homemade or makeshift product, but rather a professional manufacture.

Physical Deformation and Cosmetic Condition

No scratches, dents, rust, or paint chipping have been detected on the visible surfaces of the device. The metal profile connection points appear solid. No cracks or breaks have been observed on the plastic covers or wheels.

Mechanical Components Analysis

• Wheels: There are 4 wheels underneath the device, providing mobility. Locking brakes (gray levers) are present on the rear wheels. The surfaces of the wheels are clean, indicating they have not been rolled on the ground or have been rolled very minimally.
• Leg Opening Mechanism: Foot pedals for opening and closing the lift’s legs sideways are visible at the rear of the lower chassis. The mechanism appears sturdy.
• Sling Attachment (Spreader Bar): At the end of the lifting arm, there is a two-pronged metal attachment where the transfer sling will be hung. The hooks of the attachment are solid.

Electronic Components and Accessories

The device’s electronic system has an integrated structure:

• Control Box: This is the main brain unit mounted on the body. A red Emergency Stop button is clearly visible on it. Additionally, a battery charge status indicator and an LCD screen panel are present in the visual.
• Actuator (Motor): The linear motor that moves the lifting arm is equipped with a red safety/manual lowering cap. Cable connections appear neat.
• Hand Remote Control: A wired remote control unit is connected to the device and has up-down function buttons.

Missing Parts

In the visual, one of the most important parts of the lift, the patient transfer sling, is not visible. This part is typically an external accessory but is essential for the lift to fulfill its function. No mechanical or electronic deficiencies have been observed on the device itself.

Usage Areas and Compatibility

This product is designed for transferring bedridden or mobility-impaired patients between places such as beds, wheelchairs, or toilets. It is suitable for use in home care services, nursing homes, or hospitals. The extendable lower legs allow it to fit under wheelchairs or chairs.

Quantity Information

The visual shows 1 unit of an integrated patient transfer lift (including all motor and wheel equipment).

Potential Malfunction Risk

According to the data obtained from the visuals, the device appears to be in excellent cosmetic and structural condition. There are no signs of crushed or broken cables or loose parts. Although no visible risk factors are present, given that the product is in new condition, it is recommended to check the initial charging performance of its battery.