Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 06.07.2026
Report code: 1783347770
G Life YK-820A Handheld Pulse Oximeter Analysis Report
Device Identification and Brand Model Information
The image shows the original packaging box of a handheld pulse oximeter device. According to the information on the box, the brand of the device is clearly identified as G Life and the model as YK-820A. This device is a medical product used to measure blood oxygen saturation (SpO2) and pulse rate (PR).
Authenticity Assessment
The logo quality, typography, and general design on the product’s packaging box suggest that the product is original. No signs of counterfeiting or low-quality workmanship have been observed.
Usage Areas
This handheld pulse oximeter is used to measure blood oxygen saturation (SpO2) and pulse rate (PR). It is suitable for use in various environments such as personal monitoring at home, hospitals, oxygen bars, and community health centers. It is ideal for patients with respiratory conditions or individuals traveling at high altitudes to monitor their health status.
Quantity Information
The image shows the packaging box of one G Life YK-820A Handheld Pulse Oximeter device. The device itself is depicted as an image on the box.
General Condition and Physical Deformation
The product is presented in its original packaging box. The general condition of the box is good, giving the impression that the product is new or unused. There is a slight dent or fold on the top right corner of the box. Since the device itself is an image on the box, no direct comment can be made regarding physical deformation.
Mechanical and Electronic Components
The device is not physically present in the image but appears as a picture on the box. Therefore, no direct comment can be made regarding the physical condition of the mechanical or electronic components. However, the device’s screen, control buttons, and general design are clearly visible in the image on the box.
Accessories
Only the original packaging box of the product is visible in the image. Cables, sockets, or other accessories belonging to the device are not visible. There is no socket input or accessory information on the box.
Battery Status
There is a battery level indicator on the screen of the device image on the box. This indicates that the device operates with an internal or external battery. However, there is no additional information available from the image regarding the capacity or physical condition of the battery.
Label Information
The following information is present on the product’s packaging box:
- G Life Logo: The corporate logo representing the product’s brand.
- YK-820A: The model code of the product.
- Handheld Pulse Oximeter: The description explaining the type and primary function of the product.
- Gez Logo: Another logo located at the bottom of the box.
- OK Mark: A green check mark inside a red circle, which may symbolize the product’s compliance or quality.
There is no detailed label information such as a serial number, lot number, or REF code in the image.
Screen Analysis
The screen of the device image on the box is turned on and displays various data. At the top of the screen, there is a battery level indicator and a symbol that is likely for wireless connectivity (Bluetooth). In the main section of the screen, the SpO2 value is shown in large font as 98, and the PR (Pulse Rate) value is shown as 120. Below the SpO2 value, minimum and maximum values (99 and 98) are specified. Below the PR value, there are minimum and maximum reference values (160 and 50) for the pulse rate. At the bottom of the screen, a pulse waveform (plethysmograph) and a colored bar graph, which appears to be a perfusion bar, are visible. There are no error messages or warnings on the device screen.
Size and Compatibility
There is no direct measurement or size information on the product’s packaging box. However, the definition of the product as “Handheld” suggests that it is easily portable and of a size that can be comfortably held in the hand. Such devices can generally be used with appropriate sensors for adults, pediatric, and neonatal patients.
Manufacturing Year
There is no concrete information regarding the manufacturing year on the packaging box or the device image in the picture. Therefore, the manufacturing year could not be determined.
Documents
No invoices, warranty certificates, user manuals, or other documents belonging to the product are visible in the image.
Usage Duration
There is no information regarding usage hours or total duration of use on the device’s screen, label, or packaging. This information could not be determined through visual evidence.
Existing Faults
The device image on the product packaging box in the picture represents a new product. There is no clear evidence of any faults such as broken parts, error messages, severed cables, or missing components in this image.
Potential Fault Risk
Since the product is presented in its original packaging with an image of a new product, no potential fault risks such as severe wear, corrosion, or cable crushing have been observed. The general condition of the product appears to be good.
