Secondhand Nellcor PM10N Handheld Pulse Oximeter

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 25.02.2026

COVIDIEN Nellcor Series Portable Monitor Analysis Report

Device Identification and Brand Information

The device shown is a portable monitor used for medical measurement and patient monitoring. On the front of the device, the COVIDIEN logo and brand are clearly visible at the top. Immediately below, the Nellcor inscription is present. The device structurally conforms to Nellcor series pulse oximeter monitors with its characteristic vertical design and front panel layout. The device is shown as a single unit; accessories such as sensors, probes, or charging cables are not included in the visual.

Physical Condition and Cosmetic Inspection

The product’s outer casing is made of hard plastic material in a beige/cream color. The casing maintains its general integrity; no cracks, breaks, or deep deformations were detected from the visual angle. In the upper right corner of the device, on the front, there is a blue circular protective or covering part.

• Casing Condition: Light signs of use are present on the plastic surfaces, but no damage compromising mechanical integrity is observed.
• Cleanliness Status: The screen surface has dense fingerprint smudges and circular wiping marks. Slight dust accumulation is visible on the casing. Sterilization and detailed external cleaning are required.

Screen Analysis

The upper half of the device’s front face is covered by a large black screen panel. The screen is in the off position, thus there is no visual data regarding pixel status, illumination capacity, or interface errors. Although dense oiliness and fingerprint smudges are visible on the physical surface of the screen, no deep scratches or cracks have been detected on the screen glass. The smudges are wipeable.

Control Panel and Interface Elements

Below the screen, there is a membrane keypad used for device management. The symbols on the keys are clear and untarnished. The keypad shows no signs of tearing or collapsing.

• Navigation Buttons: Vertically aligned in the center, there are “Up Arrow”, “Confirm (Check Mark)”, and “Down Arrow” buttons with white icons on a blue background.
• Function Buttons: On the left side, “Return” (top) and “Alarm Mute” (bottom) buttons are located. On the right side, “Power/On-Off” (top) and “Menu/List” (bottom) buttons are positioned.
• LED Indicators: Small LED windows/holes for status notifications have been observed to the left of the Power button and above the Alarm button.

Areas of Use and Purpose

The device in the visual is a medical measurement device used in various hospital departments (emergency, intensive care, ward floors) or home care services to continuously or intermittently monitor the patient’s blood oxygen saturation (SpO2) and pulse rate.

Missing Parts and Accessories

In the reported visual, only the main unit (console) of the device is present. The SpO2 finger probe, extension cables, or adapters required for use are not available in the visual. Furthermore, no stand or desktop support (other than the device’s own base) that would enable the device to stand upright is visible.

Label and Technical Data

On the front face of the device, there is no label containing a distinctive model number (e.g., PM100N etc.), serial number, manufacturing date, or lot number, other than the brand and product family name. Since these technical details are typically located on the device’s rear panel, this data cannot be accessed from the current angle.

Overall Assessment and Originality

Upon examination of material quality, logo printing, and keypad layout, the device is evaluated as an original COVIDIEN product. It is in a ‘used’ condition, second-hand. While there is no physical damage, there is visible dirtiness resulting from active use. The functional status of the device (whether it turns on) and battery performance cannot be verified from the visual.