Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 18.08.2026
Report code: 1787050740
JAY-140 U2.0 Electronic Control Board Analysis Report
Device Identification and Basic Information
The image shows an electronic control board with a green, multi-layer printed circuit board structure. The board contains numerous integrated circuits, capacitors, relays, terminal sockets, a buzzer, and heat sink components. Within the scope of device identification, it is observed that the product is an internal electronic control board mounted on an external device.
- Brand and Model: There is no direct brand name visible in the image. The model code JAY-140 U2.0 is located on the bottom left corner of the board. This code indicates the identity and version of the board.
- Authenticity: The print quality on the board, soldering layout, component placement, and the original manufacturer logo and font on the integrated circuits indicate that the product is an original circuit board compliant with industrial standards.
- Quantity Information: There is a single electronic control board present in the image.
Usage Areas and Compatibility
This control board is designed to manage electric motors, relay outputs, and switching circuits. It serves to control the power and signal distribution of various medical or electronic systems. The numerous multi-pin connector sockets on it allow for the connection of different sensors and external modules to the board.
General Status and Physical Condition
The general condition of the board is new. No burn marks, corrosion, liquid contact, or physical deformation are observed on its surface. The copper traces and solder points are clean and intact.
- Mechanical Components: There are no moving mechanical parts on the board. The plastic and metal socket housings and the black heat sink blocks are in place and flawless.
- Electronic Components: The integrated circuits, cylindrical capacitors, resistors, and the black SANYOU brand relay are visually intact. There are no electronic issues such as swollen capacitors or leaking batteries.
- Accessories: The board is presented only as a circuit board without an external box or cable harness. There are numerous white socket inputs on the edges; these inputs allow for external cable connections.
Battery and Power Components
In the middle right section of the board, there is a green cylindrical rechargeable battery or backup battery component. The value 3.6V is read on this component; this value indicates the operating voltage of the component and serves to protect the data memory when the system power is cut off.
Label and Text Inventory
All texts and codes located on the board and its components are as follows:
- JAY-140 U2.0: The model and version code located on the bottom left corner of the board.
- SRD-S-112D: The part code written on the black SANYOU brand relay. This code indicates that the relay has a 12VDC coil voltage.
- 10A 125VAC / 7A 250VAC: The current and voltage values on the relay; they indicate the maximum load capacity the relay can switch.
- CN1, CN2, CN3, CN4, CN5, CN6, CN12: Port identification labels next to various connector sockets.
- Codes from R1 to R37: Location labels for resistor components.
- Codes from C1 to C15: Location labels for capacitor components.
- Codes from VT1 to VT6: Location labels for transistor or semiconductor components.
- IC5, IC6: Integrated circuit location labels.
- VD9, VD12, VD15: Diode component location labels.
- Chinese Characters (开关): There is a Chinese term in the middle right section of the board indicating the switching function.
Display, Dimensions, and Compatibility
There is no digital display or screen panel on the board. There is no direct measurement information regarding dimensions or user compatibility; however, standard electronic board mounting holes are present.
Production Year and Documents
There is no production year directly printed on the labels or the printed circuit board in the image. The design and component structure comply with current electronic manufacturing standards. No documents such as invoices, warranty certificates, or user manuals are present in the image.
Usage Duration, Failure, and Risk Analysis
There is no counter or data on the board indicating operating hours. Visual inspection shows no evidence of broken parts, blown components, broken traces, or malfunctions. No potential risks such as severe wear, corrosion, or crushed cables are observed; the condition of the board is clean and active.
