Secondhand Elektro-mag M 420 P 48 Liter Hot Air Sterilizer

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 03.02.2026

Elektro-mag M 420 P Dry Air Sterilizer and Oven Analysis Report

Device Identification, Brand, and Model

The device shown in the visuals is a heating and sterilization device used in professional laboratory and medical environments. Following an examination based on the prominent logos and model name on the device’s front control panel:

• Device Type: Hot Air Sterilizer and Laboratory Oven.
• Brand: Elektro-mag (The logo and name are clearly legible on the panel).
• Model: M 420 P (The model number is clearly written on the top-left corner and in the center of the panel).

The typography, logo placement, and panel design on the device indicate that the product is an original Elektro-mag production.

Areas of Use

Based on the phrase “HOT AIR STERILIZER LABORATORY OVEN” on the panel, two primary functions of this device have been identified:

• Sterilization: Sterilization of surgical instruments or heat-resistant medical materials with dry air.
• Oven (Drying/Heating): Drying glass materials in a laboratory environment, microbiological culture studies, or material testing at specific temperatures.

Technical Specifications and Panel Analysis

The following data regarding the device’s technical capabilities has been obtained from the control panel, which is visible in detail in the second visual:

• Control System: The panel features the phrase “By programmable PID microprocessor controller with timer.” This indicates that the device provides precise temperature control with a programmable PID microprocessor and a timer.
• Digital Display: An LCD/LED screen is located at the top of the device for monitoring digital data (temperature/time) (The screen is dark as the device is turned off).
• Keypad: There are four yellow physical control buttons: “SET”, “START” (Up arrow), “STOP” (Down arrow), and “MODE”.
• Safety Thermostat: An analog safety thermostat dial, operating independently of the digital control, is visible on the panel. The scale of this dial is between 50°C and 300°C. The red indicator on the dial is currently positioned at the lowest level (likely around 50°C). Additionally, there is a warning light (safety therm. takeover) in this section.
• Power Switch: A green, illuminated “ON/OFF” power switch is located at the bottom of the panel.

Physical Condition and Status

Based on the data obtained from the visuals, the general condition of the device is as follows:

• Outer Casing: The white outer casing of the device appears quite clean. No significant rust, dents, or deep scratches have been detected on visible surfaces. The paint condition is good.
• Control Panel: The navy blue control panel label is intact, with no peeling or deformation visible. The text is legible.
• Door and Mechanics: The device’s front door features a black, recessed handle mechanism. The door hinges and handle appear visually sound.
• Cleanliness: The device is generally clean and gives the impression of being well-maintained, even if it has been used. No heavy dust or dirt accumulation has been observed.

Labels and Warning Signs

Labels aimed at ensuring operational safety are present on the device:

• Warning Label: A yellow, round label is located on the upper right corner of the door (when viewed from the front). It is understood that this label, partially visible on the right edge of the second visual, contains the warning “READ THE USER MANUAL before operating the device” in English and Turkish.
• Brand Label: A second rectangular “elektro-mag” logo is located on the upper right corner of the door.

Accessories and Connections

The visual shows the presence of a black power cable emerging from the left rear side of the device. However, the end of the cable (plug part) and its length are not within the visual frame. The internal shelves of the device are not visible as the door is closed. In total, 1 main device is present in the visual.

Potential Malfunction Risk and Conclusion

No physical deformation (break, crack, liquid contact trace, burn) indicating a potential malfunction risk is found in the device’s exterior appearance. The integrity of the analog knobs and membrane buttons has been preserved. However, the functionality of the electronic components and the screen’s status could not be tested as there is no visual of the device being powered on and operational. Based on the visual inspection, the physical cosmetic condition of the product can be reported as very good and clean.