Secondhand Nüve FN 500 120 Liter Hot Air Sterilizer

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 28.03.2026
Report code: 1774686645

Nüve FN 500 Dry Air Sterilizer Analysis Report

Device Identification and Basic Information

The device shown in the images is a dry air sterilizer (oven) used in laboratory and medical fields. Based on the logos and inscriptions on the front panel of the device, its brand has been definitively identified as Nüve and its model as FN 500.

Areas of Use

This device is used for sterilization, drying, and heating processes with dry hot air in medicine, dentistry, veterinary medicine, and various research laboratories.

Quantity and Equipment Information

The images show 1 main device and 2 perforated stainless steel shelves placed inside the device’s chamber.

Physical Condition and State

The device is in used condition. There are superficial scratches and minor marks on its white outer casing due to use. Brown discoloration and stains, assessed to have occurred due to heat or liquid spills, were observed on the bottom of the device’s inner chamber and the lower sections of the side walls. No breaks, cracks, or dents were detected on the device’s lid, hinges, or outer casing. The gray lid gasket maintains its integrity.

Mechanical and Electronic Component Assessment

The device’s lid locking mechanism and black recessed handle appear to be intact. The analog safety thermostat dial on the front panel is physically undamaged. It is understood that the device is connected to a power source and operational, indicated by the illuminated green power switch and active numbers on the digital displays. No physical wear, fading, or perforation is observed on the membrane keypad of the control panel.

Display and Control Panel Analysis

On the dark navy control panel located on the left side of the device, there are two green digital displays:

• Upper Display Shows the temperature value in degrees Celsius. In the images, values of 216 and 047 are read on this display at different moments. To the right of the display, there is a HEAT (Heating) warning LED.
• Lower Display Shows the timer value in minutes. In the images, values of 008 and 000 are read on this display at different moments. To the right of the display, there is an ALARM warning LED.

On the panel, there are up/down arrow keys for temperature and time adjustment, a start/stop button, and an alarm mute button. At the bottom, there is a rotary safety thermostat knob (Safety Thermostat) adjustable between 50 and 300 degrees.

Label and Warning Information

The labels and warnings identified on the device are as follows:

• Front lid, upper left corner: A yellow background with black text, featuring a “DİKKAT” (CAUTION) warning label containing Turkish warning text about flammable liquids and sterilization temperatures.
• Front lid, upper right corner: A round ISO 9001 quality assurance system certification label.
• Above the front lid handle: A yellow background with “KULLANMA KILAVUZUNU OKUMADAN ÇALIŞTIRMAYINIZ” (DO NOT OPERATE WITHOUT READING THE USER MANUAL) warning label.
• Inner chamber, upper trim: A yellow background with “DİKKAT SICAK YÜZEY” and “ATTENTION HOT SURFACE” dual-language warning label.

The main manufacturer label containing the device’s serial number, year of manufacture, or REF code is not present in the images.

Originality and Fault Status

Considering the logo quality, industrial design, and labeling on the device, it is assessed to be an original product. No clear fault, broken part, or error code on the display that would prevent the device from operating has been detected in the images. Apart from the staining in the inner chamber, the general condition of the device is good. No cable crimping, heavy rusting, or physical deformation that would pose a potential fault risk has been observed.