Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 27.02.2026
AcuVista Grace Portable Ultrasound Device Box and Linear Probe Analysis Report
Device Identification
Upon examination of the visuals, three main elements have been identified:
1. A portable ultrasound device box with product images and information on it.
2. A single linear probe (transducer) belonging to the ultrasound device, photographed separately.
3. A head loupe (magnifying examination glasses) resting on the box, unrelated to the main subject but present in the visual.
Brand and Model
Ultrasound Device (Box Information):
Based on the writings and logos on the product box, the brand has been identified as AcuVista and the model as Grace. The front face of the box clearly states that the device is a “PORTABLE ULTRASOUND SCANNER”. The manufacturer is indicated as “ACUVISTA ULTRASOUND Ltd.”
Ultrasound Probe:
According to the label data on the probe connector, the model number has been determined as L12-5L40N-4. This coding, according to technical nomenclature standards, confirms that the probe is a “Linear” type device, likely with a frequency range of 5-12 MHz and a 40mm lens width.
Accessory (Loupe):
No distinguishing logo or text defining the brand or model of the head-mounted loupe unit resting on the box could be identified from the visual angles.
Originality
The print quality on the box, logo placement, the font of the technical label on the probe, and the “Warranty Void If Removed” label all support the conclusion that the product is an original item manufactured to industrial standards. The probe’s molding craftsmanship and screw joint points conform to professional manufacturing standards.
Areas of Use
AcuVista Grace Ultrasound: A general-purpose ultrasound system focused on mobility, used for imaging in radiology, internal medicine, emergency medicine, and field studies.
Linear Probe (L12-5L40N-4): This probe, likely possessing a high-frequency range, is suitable for superficial tissue imaging, vascular structures (vessels), thyroid, breast, musculoskeletal system (MSK), and nerve block applications.
Head Loupe: Used to magnify images during general medical examinations, dental procedures, or non-surgical interventions requiring detailed inspection.
Quantity Information
A total of 3 items/objects are shown in the visuals:
1 Original Product Box
1 Linear Ultrasound Probe
1 Head Loupe
General Condition
The physical condition of the products varies by item. The ultrasound probe appears cosmetically clean and in a near-new condition. The original box, however, shows natural wear and tear from storage or transportation.
Physical Deformations
Box: There are peeling on the corner tapes and friction marks on the surface that may have occurred during shipping. However, the box retains its form.
Probe: No cracks, discoloration, or dents were detected on its plastic housing. The strain relief and cable exit point are intact.
Loupe: Slight signs of use and discoloration are noticeable on the leather of the cushions in the headpiece.
Mechanical Components
The probe’s cable connection points and the connector locking/screw mechanism (enclosed screws) appear intact. The lens (acoustic window) surface of the probe head looks visually smooth, and no deep scratches or membrane detachment were observed from the photographed angles. The adjustment knobs of the head loupe are in place.
Electronic Components
As the main body of the ultrasound device (screen and processor unit) is not present in the visuals (only its box is seen), no comments can be made regarding the electronic condition of the main unit. Since the probe’s connector pins are inside the plastic protective housing, their condition (bend/oxidation) cannot be analyzed from the visual.
Accessories
Aside from the probe, no accessories such as a power cable, adapter, or gel belonging to the ultrasound device are present in the visual. The head loupe has been evaluated as an external accessory, independent of the ultrasound device.
Label Information
The following data was read from the silver-colored label on the probe connector:
- Model Code: L12-5L40N-4
- Serial/Part Number (S/N): 3699-151022-0055
- Warning: Warranty Void If Removed
Information on the box:
- Weight Limit: 20 kg max
- Warning Signs: This Way Up (Arrows), Fragile (Glass), Protect From Rain (Umbrella).
- Gross Weight: GROSS: __ kg (Left blank)
- Origin: MANUFACTURED IN EU
Dimensions and Compatibility
The probe connector is a special connector, often a “Zero-Insertion Force” type or with a multi-pin structure, commonly used in portable ultrasound devices. This probe is designed to work with AcuVista’s Grace model and compatible portable series.
Year of Manufacture
A barcode data similar to the date 20.03.2015 is visible on a label on the box, but it is not clear. The “151022” code on the probe has the potential to indicate a manufacturing date of October 22, 2015, depending on the device’s serial numbering logic, but this data should be confirmed with technical documentation.
Potential Failure Risk
No visual crushing has been detected at the folding or bending points of the probe cable, which is positive for signal transmission. However, since micro-abrasions on the probe’s lens surface cannot be seen with the naked eye, nothing definite can be said without testing the image quality (artifact formation). Given that its physical integrity is preserved, no high mechanical risk is foreseen.
