Secondhand Siemens Acuson Juniper Ultrasound Machine

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 17.03.2026
Report code: 1773746506

Siemens Healthineers ACUSON Juniper Select Ultrasound Device Analysis Report

Device Identification and Basic Information

The device shown in the images is a medical ultrasonography system integrated into a wheeled transport cart.

• Brand: Siemens Healthineers
• Model: ACUSON Juniper Select
• Quantity: 1 main unit and 2 ultrasound probes have been identified.

Areas of Use

This device is used in the radiology, cardiology, obstetrics and gynecology, vascular surgery, and general imaging departments of hospitals and clinics for diagnostic ultrasound examinations. It allows for the imaging of different anatomical regions depending on the variety of probes available.

Authenticity Assessment

Upon examining the brand logos, model inscriptions, material quality, industrial design, and control panel layout on the device, it is assessed that the product is an original Siemens Healthineers production.

General Condition and State

Overall, the device appears used but well-maintained. It is cosmetically clean and shows no signs of heavy wear.

Physical and Mechanical Component Analysis

No breaks, cracks, or deep scratches have been observed on the device’s outer casing, monitor frames, or transport cart.

• Monitor Arm: The movable joint mechanism supporting the upper monitor maintains its physical integrity.
• Control Panel: The keypads, rotary knobs, and slider bars are complete. There is no physical damage or missing parts.
• Trackball: The trackball located in the center of the control panel shows slight discoloration due to use.
• Wheels: The transport wheels located at the bottom of the device appear physically sound.
• Probe Holders: The probe holder slots on the right and left sides of the control panel are intact.

Electronic Components and Screen Analysis

The device has two screens. Both screens are in the off position.

• Main Monitor: There are no visible scratches, cracks, or signs of damage on the surface of the large screen located at the top.
• Touchscreen: The glass surface of the secondary screen, located directly above the control panel, is intact.
• Connection Ports: Multiple probe input ports are located at the lower front part of the device. There is no physical deformation on the outer frames of the ports.

Accessories and Equipment

Various equipment and accessories have been identified on the device.

• Probes: Two ultrasound probes are located in the slots on the right side of the device. The inscription 12L3 is legible on the upper probe. The model of the lower probe cannot be clearly read.
• Cables: The cable of the lower probe appears to be wrapped with a pink plastic material.
• External Module: An external white box with cable connections is mounted on the transport cart at the rear of the device.

Potential Malfunction Risk

No major physical damage that would prevent the device from operating has been identified in the images. The overall condition of the device is good. Only one probe cable being wrapped with pink plastic is noteworthy. This situation might indicate an attempt to protect against superficial insulation damage on the cable. Other than this, no visible risk factors are present.