Objective AI Report
Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.
Report date: 21.03.2026
Report code: 1774113153
Sony UP-811 Video Graphic Printer Analysis Report
Device Identification and Application Area
The product in the images is a medical video graphic printer used to print video signals received from medical imaging devices (ultrasound, endoscopy, etc.) onto thermal paper. The device has the function of converting images received via analog video input into physical output.
Brand and Model Information
Brand and model information has been definitively identified based on the inscriptions and labels located on the front and rear panels of the device.
- Brand: Sony
- Model: UP-811
Quantity Information and Originality
There is 1 video graphic printer in the images. Upon examining the label quality, serial number printing, UL medical certification logos, and casing craftsmanship on the device, the product is assessed to be original.
Physical Condition and State
The device is used and in old condition. There is very noticeable yellowing on its outer plastic casing due to age, use, or exposure to light. Superficial scratches, scuff marks, and dirt stains are present on the front panel, around the buttons, and on the side surfaces of the casing. Significant dust accumulation has been observed between the ventilation grilles on the rear panel.
Mechanical and Electronic Components
No broken, cracked, or missing plastic parts that would compromise the device’s integrity are visible on the casing. The push buttons, rotary potentiometers, and slide switches on the front panel are physically in their sockets. There are slight signs of oxidation and dullness on the metal connection points and screws on the rear panel. The paper output tray and the empty space on the right side appear physically intact.
Control Panel and Connection Points
The front of the device features controls for image settings and printing commands, while the rear features power and signal connections.
Front Panel:
- POWER button
- CONTR (Contrast) and BRT (Brightness) adjustment knobs
- SOFT / NORM / SHARP slide switch
- MON, FEED, COPY, and PRINT (green colored) buttons
- FRAME / FIELD slide switch
- POSI / NEGA slide switch
- D/A OUT and ALARM indicator lights
Rear Panel:
- VIDEO IN (BNC type socket)
- MON OUT (BNC type socket, with a white plastic protective cap installed)
- REMOTE (3.5mm jack type input)
- AC IN (Standard 3-pin power cable input)
- 4-way DIP switch block for IMP (HIGH / 75 Ohm), LEVEL (LOW / HIGH), TRAP (ON / OFF), SCAN (WIDE / NORM) settings
Label and Technical Information
The information on the red and black labels located on the rear panel of the device is listed below:
- Serial Number (SER NO): 14352
- Power Requirements: AC 100-120V, 50Hz/60Hz, 1.5A
- Place of Manufacture: MADE IN JAPAN
- Certifications: UL (Medical Equipment) and SA logos
- Warnings: It is stated in English and French that the cover should not be opened to prevent electric shock and that the chassis leakage current should not exceed 100 microamperes.
Potential Malfunction Risk
No structural damage, broken sockets, or detached parts that would prevent the device from operating have been observed on its casing. However, the dust accumulation in the rear ventilation grilles indicates that the device’s interior has not been cleaned; this could lead to overheating problems during prolonged use. The intense yellowing of the casing color indicates the device’s age. Based on visual evidence, it can be stated that the device’s physical integrity is preserved, but it is cosmetically worn.
