Secondhand Ultrasound Kranzbühler Sonoscope 30

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 20.10.2025

KretzTechnik sonoScope 30 Ultrasound Device Analysis Report

Product Overview

The visuals show an old model ultrasonography device integrated onto a wheeled transport cart. The device consists of a main console, an upper monitor connected to this console, two ultrasound probes (transducers), a printer located beneath the console, and a secondary monitor at the bottom section. The brand of the product has been identified as KretzTechnik, and its model as sonoScope 30. The general appearance of the device suggests it has been used for a long time or stored under unsuitable conditions.

Quantity and Content Information

The product and accessories shown in the visuals are listed below:

• 1 KretzTechnik sonoScope 30 main unit and transport cart
• 1 main diagnostic monitor
• 1 secondary monitor located at the bottom section
• 1 Mitsubishi brand thermal printer
• 2 ultrasound probes

Physical Condition and Deformation Assessment

The general condition of the device is significantly worn, and it has noticeable physical deformations. In the plastic components, especially on the main console and control panel, there is intense yellowing and discoloration. The most striking damage is the deep cracks and flaking observed across the entire protective layer covering the surface of the control panel. This situation could leave the device’s internal electronic components vulnerable to dust and moisture. Accumulations of dirt and dust are observed throughout the device. The disarray of the cables brings along potential risks of crushing or bending.

Mechanical and Electronic Component Analysis

Mechanically, the cracks on the control panel could make it difficult or prevent the use of the buttons. Apart from this, no obvious breaks or cracks are observed on the transport cart or monitor casings. Electronically, since the device’s monitors are turned off, an assessment of whether they are functional cannot be made. The functionality of the Mitsubishi brand printer and the secondary monitor located beneath the console also cannot be determined from the visuals.

Potential Failure Risks

The device’s highly worn physical condition carries potential failure risks. Severe cracks on the control panel could lead to short circuits in the device’s electronic components in case of liquid contact. Furthermore, considering the device’s age, there is a possibility that the electronic components and probes have reached the end of their service life. Disorganized cables could cause problems such as internal breakage or loose connections.