Secondhand Leaseir Laser Epilation Device

Objective AI Report

Disclaimer: I am Medbidding AI. I am an unbiased AI robot. I have generated the following report automatically (without human intervention). The report was prepared by examining only the product images in the ad in detail. The report may contain errors. Medbidding and other parties disclaim any liability that may arise from this report or reliance on its contents. If you have any questions or notice an error in the report, please contact Medbidding engineers.

Report date: 22.11.2025

Leaseir 810HR Diode Laser Hair Removal Device Analysis Report

Device Identification and Area of Use

The examined images belong to a professional-grade laser hair removal device used in the medical aesthetics sector. The product has a vertical (tower-type) design, is wheeled, and is a portable unit. The primary purpose of the device is laser hair removal, which provides permanent removal of unwanted hair. The phrase “Class 4 Laser Product” confirms that the product is a high-power laser device and should be used in a professional clinical environment.

Brand and Model Information

The front panel prints, interface texts, and technical label details on the rear side shown in the images have been thoroughly examined, and the following information has been definitively identified:

• Brand: Leaseir
• Model: 810HR
• Manufacturer: Leaseir Medical Light SL
• Place of Manufacture: Spain (address 33203 Gijón, Spain is present on the label)
• Model Verification: The device’s model code “810HR” is clearly stated on the label. This code typically indicates Diode laser technology operating at an 810nm wavelength.

Label and Technical Data

The data read from the gray technical label on the rear panel of the device is as follows:

• Serial Number (Serial): 268
• Electrical Values: 220-240V, 12A max, 50-60 Hz
• Safety Class: Class 4 Laser Product (Hazardous Laser Class)
• Warnings: “DANGER” and invisible laser radiation warnings are present.
• CE Mark: Present, indicating the product’s compliance with European standards.

General Physical Condition and State

The device’s casing generally appears clean and structurally intact. No significant cracks or breaks have been detected on the main body (white plastic parts). The device’s wheels and base stand firmly. There is no fading of the “Leaseir” lettering and logos on the front panel. The emergency stop button (red mushroom button) and key slot are physically in place.

Laser Handpiece and Mechanical Analysis

The most critical part of the analysis concerns the laser handpiece, which comes into contact with the skin. Significant wear has been observed in this section:

• Handpiece General Structure: It has an ergonomic white grip handle and a gray connection cable. A gray-colored cover or button mechanism is visible on the handpiece.
• Tip Condition – SIGNIFICANT DEFORMATION: There is a serious amount of oxidation, rust, or corrosion on the metal ring surrounding the sapphire/glass window where the laser shot is emitted. It is clearly visible that the metal surface has lost its shine, taking on a brownish and matte texture. This condition indicates that the handpiece has been used intensively or has experienced metal fatigue due to liquid contact during cleaning/disinfection processes.
• Hose and Cables: No visible tears or kinks have been detected in the thick gray hose between the main unit and the handpiece. However, the condition of the connection points cannot be clearly understood from the images.

Screen and Software Analysis

The device’s touchscreen is operational, and its backlighting is working. The following information has been obtained from the screen display:

• Interface Language: English menu is active.
• Menu Options: Language selection, touch calibration, laser test, and service mode options are listed on the screen.
• Pulse Count: The inscription “U: 0000593453 p” is readable in the lower right corner of the screen. This information indicates that approximately 593,453 pulses have been performed with the device’s handpiece to date. This confirms that the device is a used product.
• Temperature Values: Technical sensor data can be read on the screen: “To1=15°C”, “To2=15°C”, and most importantly, “Tip=5°C”. The tip temperature being 5 degrees indicates that the handpiece cooling system is electronically detected and is attempting/performing cooling at that moment.

Accessories and Equipment

The parts seen with the device in the images are as follows:

• 1 Main Device Body
• 1 Laser Handpiece (Integrated into the device)
• 1 Power Key (Attached to the device)
• 1 Foot Pedal (Foot Switch) – Black colored, resting on the floor.
• Connection Cables (Black cables emerging from the back of the device are visible in the images)

Potential Malfunction Risk and Warnings

Although the device’s electronic systems (screen, sensor readings) appear to be working, corrosion (rusting) on the metal frame at the tip of the laser handpiece is the biggest risk factor. This corrosion may indicate the following:

• Metal degradation may have occurred due to leakage of the handpiece cooling fluid (purified water).
• Chemical reaction may have occurred due to cooling gel or disinfectants being left on the metal surface for too long.
• As the handpiece is the surface that contacts the skin, this rough and oxidized structure may lead to hygienic issues or the risk of scratching/irritating the patient’s skin during application.

Overall, the device is in a “used but in need of maintenance” condition. In particular, the handpiece may require detailed technical servicing or replacement. It is observed that the device is not displaying any error codes programmatically and is waiting on the service menu entry screen.